This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
carburetor leak
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 355
- Joined: Wed Dec 19, 2007 5:14 pm
- Location: Warwick, Rhode Island
carburetor leak
Hi All,
My carburetor is leaking at the choke shaft, right at the choke lever.Can I assume that if I replace the felt seal and the brass press in washer that comes in a quality carb rebuild kit that I will be able to stop the leak or at least slow it down significantly? Any input or advice appreciated!
Greg
(Greg49)
My carburetor is leaking at the choke shaft, right at the choke lever.Can I assume that if I replace the felt seal and the brass press in washer that comes in a quality carb rebuild kit that I will be able to stop the leak or at least slow it down significantly? Any input or advice appreciated!
Greg
(Greg49)
1915-1917 McCormick Tedder ,1920's Deering Hay Rake, 1949 Cub,Oliver horse drawn plow 83n,syracuse plow,hussey plow, various planet jr. cultivators
-
- Team Cub
- Posts: 11827
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: carburetor leak
Greg, I can't visualize how the gas level would be getting high enough to come out the shaft seal. I don't think the felt was ever intended to be a liquid seal. On the bottom of the carb is the plug with a felt disc under it that allows excess gas to drip out. I wonder if you have a needle valve/float issue.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- randallc
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: carburetor leak
Yeah, surely a float problem or trash in the needle not allowing it to shut fully off. Don't pound on the carb, just a little can bend them. Probably need to start at the fuel strainer and see if there is any trash in it. If so start there and work your way to the carb. If it won't flush out, then you'll need to take it apart and clean it.
A little bit of leakage, especially if hard to start is normal while trying to start. If you have to take the carb off, be careful not to break the idle tube.
A little bit of leakage, especially if hard to start is normal while trying to start. If you have to take the carb off, be careful not to break the idle tube.
- challenger
- 10+ Years
- Posts: 1087
- Joined: Sun Apr 18, 2010 6:22 am
- Zip Code: 21742
- Tractors Owned: 1955 F Cub (2)
1952 F Cub
1948 F Cub
2155 JD
216 JD - Circle of Safety: Y
- Location: Hagerstown MD
Re: carburetor leak
Just my two cents. Those who have spent time around the Cub engine know that most carburetor needle valves will leak slightly when the engine is off. This slight leak will not affect the performance of the running engine, but can cause some to believe they have carburetor problems. Standard operating procedure should include shutting off the gas tank valve whenever the engine is turned off for extended periods of time. I am not saying it is impossible to achieve a leak proof needle valve set up, but it is my opinion that the time wasted in doing so is not worth it. Just shut your tank valve off when you shut down for the day and accept the fact that this goes with the territory.
-
- Cub Pro
- Posts: 7504
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: carburetor leak
Bob McCarty wrote:Greg, I can't visualize how the gas level would be getting high enough to come out the shaft seal. I don't think the felt was ever intended to be a liquid seal. On the bottom of the carb is the plug with a felt disc under it that allows excess gas to drip out. I wonder if you have a needle valve/float issue.
Bob
Bob, we went through the needle valve, float area, a couple of weeks ago, and stopped the "leaking when not running" issue. This is a newly developed problem. Ed
- Don McCombs
- Team Cub Mentor
- Posts: 17443
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: carburetor leak
Greg,
I'm having a hard time understanding how fuel could be leaking from the choke shaft openings without being visible from several other places. Namely the weep hole and the air cleaner inlet hose. In order to reach those openings, the fuel would have to be awfully deep in the throat. I suggest disconnecting the air inlet hose and see what you find. My suspicion is that it is coming from somewhere above, and seeping down to the area of the shaft. Let us know.
I'm having a hard time understanding how fuel could be leaking from the choke shaft openings without being visible from several other places. Namely the weep hole and the air cleaner inlet hose. In order to reach those openings, the fuel would have to be awfully deep in the throat. I suggest disconnecting the air inlet hose and see what you find. My suspicion is that it is coming from somewhere above, and seeping down to the area of the shaft. Let us know.
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: carburetor leak
Don, It must be filling up with gas to do that , I think a faulty mechanic I mean doughnut eater
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
- Hengy
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
- Contact:
Re: carburetor leak
The weep hole must be plugged. I am working on a member's carb that the PO had plugged the weep hole with a sheet metal screw because it "leaked" too much. You should have seen how much fuel got caught up in the intake side of the carb. So much that it stalled the tractor! Sometimes I just don't know what PO's are thinking!!!
-
- 10+ Years
- Posts: 355
- Joined: Wed Dec 19, 2007 5:14 pm
- Location: Warwick, Rhode Island
Re: carburetor leak
Gentlemen,
I know what I posted about my carburetor seems far-fetched.As Ed (Scotty D's Dad) had posted, we had taken the carb apart together, made positively sure that it was very clean, Tested the needle valve and seat, and checked and adjusted the float.
I took it home , installed it , and it worked fine.I had also cleaned the sediment bowl and screen prior to all of the above.Two days later, I started up the cub, and saw that it was not leaking from the bottom as it had been, but now from the area of the choke linkage.I put a finger under the linkage and got a constant drip.Am I out of my head?
What I plan to do now is make sure the carb is totally dry of fuel on the outside, then sprinkle some baby powder on it, start it up, run it , shut it down and observe where fuel shows on the powder first.Again, far fetched , but I believe it will show that fuel is coming from that location.Next move? re-evaluate the float setting again.I do not believe Ed's mechanical skills are at all deficient.I WILL GET to the bottom of this.(hopefully with his help.)
Greg
I know what I posted about my carburetor seems far-fetched.As Ed (Scotty D's Dad) had posted, we had taken the carb apart together, made positively sure that it was very clean, Tested the needle valve and seat, and checked and adjusted the float.
I took it home , installed it , and it worked fine.I had also cleaned the sediment bowl and screen prior to all of the above.Two days later, I started up the cub, and saw that it was not leaking from the bottom as it had been, but now from the area of the choke linkage.I put a finger under the linkage and got a constant drip.Am I out of my head?
What I plan to do now is make sure the carb is totally dry of fuel on the outside, then sprinkle some baby powder on it, start it up, run it , shut it down and observe where fuel shows on the powder first.Again, far fetched , but I believe it will show that fuel is coming from that location.Next move? re-evaluate the float setting again.I do not believe Ed's mechanical skills are at all deficient.I WILL GET to the bottom of this.(hopefully with his help.)
Greg
1915-1917 McCormick Tedder ,1920's Deering Hay Rake, 1949 Cub,Oliver horse drawn plow 83n,syracuse plow,hussey plow, various planet jr. cultivators
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: carburetor leak
Take the breather pipe off and then check it
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: carburetor leak
Leak gasoline or condensation?
As others have suggested, remove the air cleaner tube. If there is fuel dripping from the choke control shaft the air cleaner tube will be full of gasoline. If carburetor throat and air cleaner tube had that much fuel, tractor wouldn't start or run.
I'm going with condensation.
As others have suggested, remove the air cleaner tube. If there is fuel dripping from the choke control shaft the air cleaner tube will be full of gasoline. If carburetor throat and air cleaner tube had that much fuel, tractor wouldn't start or run.
I'm going with condensation.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 355
- Joined: Wed Dec 19, 2007 5:14 pm
- Location: Warwick, Rhode Island
Re: carburetor leak
OK.I've got something to go on now.Thanks all! I will inform everyone of my findings.
Thanks again.
Greg
Thanks again.
Greg
1915-1917 McCormick Tedder ,1920's Deering Hay Rake, 1949 Cub,Oliver horse drawn plow 83n,syracuse plow,hussey plow, various planet jr. cultivators
-
- 5+ Years
- Posts: 42
- Joined: Thu Mar 16, 2017 8:01 pm
- Zip Code: 47523
Re: carburetor leak
Hengy wrote:The weep hole must be plugged. I am working on a member's carb that the PO had plugged the weep hole with a sheet metal screw because it "leaked" too much. You should have seen how much fuel got caught up in the intake side of the carb. So much that it stalled the tractor! Sometimes I just don't know what PO's are thinking!!!
This kinda caught my attention if you don't mind d me asking you. My carb is leaking gas into the air intake bad, not sure why and I cannot get the cub to start, only fire and acts like it's just flooding out.. and what exactly is a weep hole?! My first cub and I know my way around a carb just not terms haha
-
- Cub Pro
- Posts: 7504
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: carburetor leak
Float is probably out of adjustment, or the float valve has a speck preventing it from closing. The weep hole is on the bottom of the carb. A hole cast into the carb, with a metal disk, with a small hole in it.
Ed
Ed
-
- Team Cub
- Posts: 11827
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: carburetor leak
ScottyD'sdad wrote: A hole cast into the carb, with a metal disk, with a small hole in it.
Ed
...and a felt plug above the disc. The discs are staked in and it's not an easy job to replace and restake them.
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
Who is online
Users browsing this forum: Ole90633 and 30 guests