Plain Jane cub questionModerator: Team Cub
5 posts
• Page 1 of 1
Plain Jane cub questionIf a cub came originally w/ no lights, what was put in the holes for the light supports?
I've never met a tractor I didn't like....but I have found some that were greatly annoying....
Re: Plain Jane cub questionI don't know, but I would guess nothing or possibly corks.
Have a good day, Art
Re: Plain Jane cub questionMud dauber nests.
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
Re: Plain Jane cub questionA stock hood was used, holes were not plugged, the light post was simply left off. More than likely IH had a simple reason behind this...so that a bare bones cub could be upgraded with lights by the owner if desired at anytime in the future. The associated knockouts in the dash panel were also left in place.
I have been collecting, buying, and selling Farmall Cub tractors, implements, and parts for nearly 11 years.
Re: Plain Jane cub questionThose holes were filled with NOS air.
Don McCombs
MD, Deep Creek Lake "1950 Something" Farmall Cub, Cub-193 Moldboard Plow 1977 IH Cub w/FH, L-F194 Moldboard Plow, L-38 Disk, L-F1 Platform Carrier, Mott FHC Mower 1948 Farmall Super A, IH 22 Mower 1951 Farmall Super C w/FH
5 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: dbboss, Jackman, Scrivet and 5 guests |
|