Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
I see a lot of cultivators that are not up to par, I intend to do a post on them with pics to let people know what to look for when buying sets of cultivators and shanks.
I will show the difference between the old and late model sets as well as the different lift springs.
Also the different type shanks.
These are spring trips The short shank goes in the front on the short toolbars
the Long on the back, It is not as important on a cub as a SA - 140
This is an older style shank I do not like this kind
This is a friction shank not the best chose if you have rocks
This is a spring shank
As well as how to tell if the shank is still adjustable.
As you can see here This is the adjustment bolt to change the angle of the foot
This one is un-adjustable Rusted beyond repair You really need to watch out with rusty cultivators
This is the plate from the factory that helps to hold the foot on correctly
This is how a lot of them are
This has little or no adjustment left to tighten it up
This one has some adjustment left
This is a later set see the lock nut
This is the early style not as strong
Make sure that the proper square head bolts are in the tool bars and the short tool bars it is very hard to make adjustments when they have the hex head bolts as they often turn instead of holding as they should
This cuff is in bad condition , threads not good on the wedge [ $30 for a new one ]
This set of fronts has the fast hitch lift spring rod. This is also a high dollar set of cultivators
a complete set like these will fetch upwards of $550 and will be a deal at that price.
There is a wide range on prices of cultivators Just because they are complete does not mean they are worth $400 to $500. Many are $200 to $250 ones and some are not worth that.
Watch out for welds They often do not hold up under use.
Just a pic of the different front lift rods
The one with the hook on the end is a later model than the one on the far side.
However they are in the parts book at the same time but have the same part # strange Uh
that is in CB1-3 I am not sure when they came out. But are much nicer and don't rub on the steering shaft or coil
Rear lift springs
The black one is for a fast hitch [ smaller hole diameter] the red one is for a standard cub [ larger diameter ]
I will get some more pics soon
Last edited by Boss Hog on Sat Feb 02, 2013 7:46 pm, edited 6 times in total.
IN GOD WE TRUST
All others pay cash
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
looking forward to it, Boss! Ed
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
Looking forward to it Boss
Look forward to it Boss...I picked up a partial set this summer that's been sitting outside for years. Not sure if they'll be salvagable or not, I've had them soaking in oil for months. Going to try to pick up the missing parts here and there this spring and hopefully be able to make use of 'em this summer.
Member IHCC Chapter 37 & 42 - North Carolina
I know that sweeps etc., are more popular down south, but will you be including the spring tips for us up here in the more northern climes? And same with the guards, hillers and other accessories for the 144, 252 etc.,?
I will be looking forward to the thread as well. A cultivator seminar on line -- how cool can that be
Great idea. I'd love to see some actually show what a complete set of cultivators are. So many are listed as such and are missing numerous parts.
Bring it on, Boss.
'49 Cub (#77786) "Jessie"
"64 Farmall Cub (#224657) "Alex"
Cub 54 Blade
193 Moldboard plow
Cub L-38 disc harrow
Damm Gary....I know you've seen complete cultivators! lol
Cultivating is my favorite Cub activity...
54 days until spring...
You're right Chis. I can't get enough iron to play in the dirt!! Also, thanks for the countdown. It bothers me when someone lists "complete set" of cultivators and there are no cuffs, half the shanks needed are missing, no lift arms, etc.... Barnyard is listing a complete set, many times this is not the case.
I think this is a great idea, for someone like me that has no idea of what a complete set would look like.
1955 Farmall Cub
193 Moldboard plow with colter and jointer
Keep in mind that mine is not listed as a "Complete" set. There are several things not there, such as the shields, jockey arch, etc. It also has a bad shovel which I pointed out. I may now have another problem with it which I wasn't aware of. That will be checked today. If the problem is as expected I will post a pic here so it can be used as another example of what to look for.
I like to let a potential buyer know of any known problems, but I am no expert so I don't know everything to look for. I think an all inclusive article on cultivators will help buyers as well as sellers know what to look for.
Who is online