And another? Fan hub

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

And another? Fan hub

Postby Jdbfish » Sun Jan 27, 2013 8:31 am

Disassembled fan hub to clean up, was making some noise. Got her all cleaned up, looks good, sounds good but what keeps oil from leaking out of the back (end closest to you if sitting in seat), is there an Irving or something I'm missing! I see there is a groove on the inside of that end in item 7 in the link below? Please explain, I'm confused again....

http://www.farmallcub.info/manuals/cub_ ... e%2014.jpg
Jdbfish
Cub Star
Cub Star
 
Posts: 98
Joined: Mon Nov 12, 2012 9:52 pm
Zip Code: 76502

Re: And another? Fan hub

Postby Boss Hog » Sun Jan 27, 2013 8:50 am

It will only hold a small amount of oil with out leaking out, The procedure is described in the manual as to how to oil it
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

8th Va fest link viewtopic.php?f=8&t=81392&p=657790#p657790
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9653
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: And another? Fan hub

Postby clodhopper » Sun Jan 27, 2013 10:28 pm

As Boss mentioned the procedure is in the manual. I like to use an oral syringe with about a 10 inch piece of tubing to oil the hub. It works as slick as a whistle.
I'll be drinking that free bubble up, and eatin that rainbow stew.
http://www.builditnc.com
User avatar
clodhopper
501 Club
501 Club
 
Posts: 706
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50a deck
60A grader blade
Circle of Safety Award
Circle of Safety: Y

Re: And another? Fan hub

Postby Jdbfish » Mon Jan 28, 2013 5:59 am

Thanks for the info folks, I appreciate it. I have read and understand the procedure but can't quite get my head around how it does not leak when the tractor is on an incline for example? Oh well, it worked for over 60 years, no sense in worrying with it now! Thanks again....
Jdbfish
Cub Star
Cub Star
 
Posts: 98
Joined: Mon Nov 12, 2012 9:52 pm
Zip Code: 76502

Re: And another? Fan hub

Postby challenger » Mon Jan 28, 2013 7:29 am

The way I understand it is that the fill hole has a stand pipe attached to it that extends inside the hub to a set point below the outside diameter of the center hub shaft/mounting bolt. After adding oil, the fill hole is positioned to face straight down, which allows excess oil to drain out over the top of the standpipe until it drops to the top of the pipe. Since the level of oil in the hub now rests below the center shaft/mounting bolt, it does not leak out when the engine is at rest. When running, the rotating hub slings the inside oil outward and centrifugal force pins most of it to the outer wall inside the hub away from the mounting bolt, thus preventing leakage. There are some strategically placed spiral grooves on the inner parts that distribute just enough of the oil to properly lubricate the shaft when the hub is spinning. It is a very fool proof and solid design.
User avatar
challenger
501 Club
501 Club
 
Posts: 962
Joined: Sun Apr 18, 2010 6:22 am
Location: Hagerstown MD
Zip Code: 21742
Tractors Owned: 1955 F Cub
1952 F Cub
1948 F Cub
2155 JD
216 JD
Circle of Safety Award
Circle of Safety: Y

Re: And another? Fan hub

Postby Clark Thompson » Mon Jan 28, 2013 11:11 am

Originally there was a O ring type seal pressed into place when part 3 was pressed together. Over the years the O ring falls apart. The O ring is not replaceable. Best thing to do is to keep a check on the oil more often than the manuel states.
Collector of Farmall cubs and cub cadets.Injoy helping people keep their cubs running. Years of experipnce.
Clark Thompson
501 Club
501 Club
 
Posts: 1449
Joined: Sun Feb 02, 2003 11:01 pm
Location: Hubbard Ohio

Re: And another? Fan hub

Postby John *.?-!.* cub owner » Mon Jan 28, 2013 11:29 am

since you apparently have it disassembled, be careful of which way the oil scoop is turned front to rear when reassembling One of the manuals (don't remember which one) has it reversed, and it will not lubricate the shaft turned that way. Here is a picture from the Blue Ribbon cooling system manual. In this picture the scoop (little curly Q to the right of the fan hub) is reversed, it should be turned with the tail facing the opposite direction. The way it is shown in this picture it will not direct the oil to the shaft. It is also incorrect in my GSS 1411 revision 1 service manual.

Image

The thing to remember when sorting this out is the the outer drum turns, but the center shaft is stationary, so it is easy to reverse how it goes together.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19098
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: And another? Fan hub

Postby clodhopper » Mon Jan 28, 2013 11:30 am

Clark Thompson wrote:Originally there was a O ring type seal pressed into place when part 3 was pressed together. Over the years the O ring falls apart. The O ring is not replaceable. Best thing to do is to keep a check on the oil more often than the manuel states.

There is a note in the owners manual about a rubber seal behind the hub. It says " The rubber seal is used for shipping purposes only and need not be replaced when worn." Is that the seal you are talking about, or is there another seal? I havent had to tear into that part of the tractor yet...
I'll be drinking that free bubble up, and eatin that rainbow stew.
http://www.builditnc.com
User avatar
clodhopper
501 Club
501 Club
 
Posts: 706
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50a deck
60A grader blade
Circle of Safety Award
Circle of Safety: Y

Re: And another? Fan hub

Postby John *.?-!.* cub owner » Mon Jan 28, 2013 11:46 am

One other note, if you over fill it and do not drain down to the proper level, the result is a cone shaped coating of oil mist on both sides of the tractor, that becomes caked with dirt, etc. , and looks terrible. I learned that lesson about 25 to 30 years ago when I got my first cub, but did not yet have a manual.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19098
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.


Return to Farmall Cub

Who is online

Users browsing this forum: Ike and 6 guests