I am wondering where in the data base are nut and bolt sizes? I need to pick up the 3/8 bolts for the PTO plate. Not a big mystery to figure out the size and length but I thought I would look it up for the correct size. I don,t see them in any of the transmission and PTO section. Are they listed someplace else?
Wally
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Parts Data Base
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 429
- Joined: Tue Jun 23, 2009 6:59 pm
- Zip Code: 02346
- Tractors Owned: .
1947 Circle Cub #1110
1947 Circle Cub #1316
1948 Cub #43915
1966 Power King
189 two way Plow
54A Blade
144 Cultivator
26 ft Welcraft
1967 Case 530ck Backhoe - Location: Middleboro Massachusetts
-
- 10+ Years
- Posts: 5189
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Parts Data Base
In the IH manual look at the part you need the bolt for, it will tell you for example Part XXXX uses 9 3/8-18 x 1" bolts
Tim
Tim
-
- 10+ Years
- Posts: 429
- Joined: Tue Jun 23, 2009 6:59 pm
- Zip Code: 02346
- Tractors Owned: .
1947 Circle Cub #1110
1947 Circle Cub #1316
1948 Cub #43915
1966 Power King
189 two way Plow
54A Blade
144 Cultivator
26 ft Welcraft
1967 Case 530ck Backhoe - Location: Middleboro Massachusetts
Re: Parts Data Base
Got it. I was looking in the On-line DB. I should have stayed old school and looked in the book.
Wally
Wally
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Parts Data Base
I put together a spreadsheet to help me inventory what I needed for dot head bolts. All the info came from the books, one page at a time.
-
- 10+ Years
- Posts: 3328
- Joined: Fri Jan 11, 2008 5:30 pm
- Zip Code: 02747
- Tractors Owned: .
1948 F Cub Fast hitch
1949 F Cub
1950 F Cub Fast hitch
1965 Loboy Fast hitch
1966 Loboy with 1000 loader
1976 International Cub
several walk behind garden tractors
(20) FastHitch implements
tons' of cultivating and planting stuff
C-16 Cub Middlebuster
(2) A33 Cub bean harvester
NOS Planet Jr. planter
172 planter, large combo hopper, 101A fertilzer hopper
Cole 250# fertilizer hopper with chain drive. - Location: MA, Dartmouth
Re: Parts Data Base
wfmdfm wrote:Got it. I was looking in the On-line DB. I should have stayed old school and looked in the book.
Wally
Bob sent out the bolt database...I can forward to you...email me at twin49cubs@verizon.net and I send it over to ya
Who is online
Users browsing this forum: ajhbike and 30 guests