[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4493: ob_start(): output handler 'ob_gzhandler' conflicts with 'zlib output compression'
Farmall Cub • View topic - Stay chain bracket

Stay chain bracket

Fri Jan 25, 2013 2:48 pm

Is there a diagram anywhere of the front stay chain bracket for the 193 plow? Parts manual does not show a clear pic of attachment and/or shape. Figure it w/be a reproduction in the shop. If someone has an OEM that they could snap a picture of and post it would give me an idea of where to start. Manual also doesn't show where/how it is attached - drawbar?? Thanks, Dusty B

Re: Stay chain bracket

Fri Jan 25, 2013 2:55 pm

Here you go Dusty.

Image
Photo courtesy of TM Tractor Parts

Re: Stay chain bracket

Fri Jan 25, 2013 5:04 pm

Image

Re: Stay chain bracket

Fri Jan 25, 2013 5:36 pm

Dusty B wrote:Manual also doesn't show where/how it is attached - drawbar?? Thanks, Dusty B


Dusty, it gets attached to your depth adjustment lever, not your drawbar.

Re: Stay chain bracket

Fri Jan 25, 2013 8:29 pm

i never knew they made 2 quadrant supports for the 193...one with a stay chain bracket and one without. Mine does not have one either. I guess I will have to make one. I have been bolting the stay chain to one of the final holes. Probably not a good idea.

Re: Stay chain bracket

Sat Jan 26, 2013 8:15 am

I've got one that has a "J" bolt in place of the stay chain keyhole bracket (Of course the hook of the 'J" is turned skyward :roll: ). Never tried it but it looks like it would work OK and it would be a whole lot easier to just drill a hole instead of trying to make the bracket and weld it on. Unless you're going for original.

Re: Stay chain bracket

Sat Jan 26, 2013 11:13 am

Dusty, is this for the plow I sold to you? I was under the impression that later 193's did not use the stay chain and therefore had no bracket welded onto the depth adjustment lever. That plow I sold you was a later model, IIRC, and had no brackets or chain provision. Perhaps Jim B. can shed some info on this correct me if I'm wrong.

Image

Re: Stay chain bracket

Sat Jan 26, 2013 11:42 am

The chain and related parts were added in 1951.

Re: Stay chain bracket

Sat Jan 26, 2013 12:31 pm

Jim Becker wrote:The chain and related parts were added in 1951.

OK............obviously the one I had above was an earlier model. :oops: But it was a nice one. PO had repainted it but it showed very little wear. It came from an estate auction and all his Cub implements were very well cared for.

Re: Stay chain bracket

Fri Feb 01, 2013 7:54 am

Denny - I'm not sure if this is that particular one or not - I have 2 of them. Thanks for the help tho guys, I do want to fabricate a stay chain as it is difficult to finish a land smoothly. Back to the scrap pile I guess! LOL ! Thanks again, Dusty B