Cub 189 plows
Moderator: Team Cub
7 posts
• Page 1 of 1
Cub 189 plows
by 56cub » Thu Feb 07, 2013 12:01 am
My brother just got this set of 189 plows. The latch bar is missing so we need to find one and the coulters are also missing but we can take those off his two 193 plows. They look like the haven't seen much use and still have some traces of blue paint and stenciling on them too.
1956 Farmall Cub
1943 Farmall M
Cub Cadet 147
Cub Cadet 128-SOLD
1969 Bolens 850 "Special"
1968 Bolens 1050
Allis Chalmers 712S
Wheel Horse B 111
Wheel Horse Electro 12
National triplex reel mower
1943 Farmall M
Cub Cadet 147
Cub Cadet 128-SOLD
1969 Bolens 850 "Special"
1968 Bolens 1050
Allis Chalmers 712S
Wheel Horse B 111
Wheel Horse Electro 12
National triplex reel mower
-
56cub - 501 Club
- Posts: 728
- Joined: Mon Dec 03, 2007 3:44 pm
- Location: pa, mcdonald
- Zip Code: 15057
- Tractors Owned: 1956 farmall cub
- Circle of Safety: Y
Re: Cub 189 plows
by bob in CT » Thu Feb 07, 2013 6:29 am
Nice find!
The coulters have a left and right mounting bracket so 193s will have right hand brackets. I think I have a NOS left hand bracket. They are a little hard to find.
I have a very similar set with the jointers (they work great flipping sod and also are handed) plus I have a set with chilled iron bottoms that I need to sell some day.
There is an interference problem with underslung exhausts. I don't have any photos but I could not mount the full set on my later tractor.
The coulters have a left and right mounting bracket so 193s will have right hand brackets. I think I have a NOS left hand bracket. They are a little hard to find.
I have a very similar set with the jointers (they work great flipping sod and also are handed) plus I have a set with chilled iron bottoms that I need to sell some day.
There is an interference problem with underslung exhausts. I don't have any photos but I could not mount the full set on my later tractor.
-
bob in CT - Cub Pro
- Posts: 5066
- Joined: Thu Jun 07, 2007 9:34 am
- Location: CT, Manchester
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
Re: Cub 189 plows
by cubguy47 » Thu Feb 07, 2013 7:35 am
bob in CT wrote:There is an interference problem with underslung exhausts. I don't have any photos but I could not mount the full set on my later tractor.
Good info Bob, I was not aware there was a fit issue with the 189 installed on a cub w/ underslung exhaust.
I have been collecting, buying, and selling Farmall Cub tractors, implements, and parts for nearly 11 years.
-
cubguy47 - 501 Club
- Posts: 2199
- Joined: Fri Dec 03, 2004 3:17 pm
- Location: Staunton, IL
- Zip Code: 62088
- eBay ID: cubguy47
- Tractors Owned: More Cubs, implements, and parts than I care to count!
- Circle of Safety: Y
Re: Cub 189 plows
by Ole90633 » Thu Feb 07, 2013 8:31 am
Nice set of 189s you got there 
The Jointers that are already installed, as opposed to rolling Coulters, work fine in previously tilled fields. While you're searching for the Latch Bar assembly, you'll need to keep an eye out for some other parts you're also missing:
one (1) 513 988 R2 Lift Bracket assembly
two (2) 512 308 R92 Lift Links with pins
two (2) 3839 BA Eyebolts
The Lift Bracket is/are two identical stampings bolted to the rear rockshaft and catch the lift chains ; the Lift Links connect the Depth Adjuster arms to the Drawbar Eyebolts.
I'm about half way through reconditioning my set and was fortunate to replace some missing parts with NOS from the factory, thanks to my local dealer.
Good looking iron and here's wishing you success finding the missing stuff !
don p.
The Jointers that are already installed, as opposed to rolling Coulters, work fine in previously tilled fields. While you're searching for the Latch Bar assembly, you'll need to keep an eye out for some other parts you're also missing:
one (1) 513 988 R2 Lift Bracket assembly
two (2) 512 308 R92 Lift Links with pins
two (2) 3839 BA Eyebolts
The Lift Bracket is/are two identical stampings bolted to the rear rockshaft and catch the lift chains ; the Lift Links connect the Depth Adjuster arms to the Drawbar Eyebolts.
I'm about half way through reconditioning my set and was fortunate to replace some missing parts with NOS from the factory, thanks to my local dealer.
Good looking iron and here's wishing you success finding the missing stuff !
don p.
- Ole90633
- Posts: 24
- Joined: Tue Aug 07, 2012 6:49 am
- Location: Williamsport, PA
- Zip Code: 17701
- Tractors Owned: 1949 Farmall Cub Standard
Re: Cub 189 plows
by Rick Prentice » Thu Feb 07, 2013 9:05 am
I'm pretty sure I have a spare latch bar that was on a cub I acquired years ago. I have a complete setup already, so I shouldn't really need that extra one and would consider selling it. I'll go out back later today and find it and let you know.
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
Rick Prentice - TeamCubGuide
- Posts: 5321
- Joined: Mon Nov 01, 2004 7:24 am
- Location: OH, Grand Rapids (historical town along the Maumee River)
- Zip Code: 43522
- Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
- Circle of Safety: Y
Re: Cub 189 plows
by KETCHAM » Sat Feb 09, 2013 5:43 am
Real nice set up...A buddy of mine got a set up at Bloomsburg IH Red Power a few years ago..good price too!!! Easier to handle a cub than the M in a smaller garden!!! Kevin 
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
KETCHAM - 501 Club
- Posts: 5453
- Joined: Thu Jul 28, 2005 2:37 pm
- Location: Marshallville Ohio
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
Re: Cub 189 plows
by Rick Prentice » Wed Feb 13, 2013 6:32 am
Just as a follow up with the latch bar I spoke of. Here's a pic of what I have.
I think it's all there except maybe the mounting bolts/nuts. A PM was sent.
Rick
I think it's all there except maybe the mounting bolts/nuts. A PM was sent.
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
Rick Prentice - TeamCubGuide
- Posts: 5321
- Joined: Mon Nov 01, 2004 7:24 am
- Location: OH, Grand Rapids (historical town along the Maumee River)
- Zip Code: 43522
- Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
- Circle of Safety: Y
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: GenrlCub and 3 guests
|
|