This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
6 volt alternator
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
- Contact:
6 volt alternator
I am thinking of trying a 6 volt alternator on one of my cubs. I am completely clueless with electrical hook ups when doing this. I have read to get a Hitachi one wire and I remember some time back reading a post about the proper fitting one so the hood does not need to be cut, (that is what I am looking for. I have searched for it but can not find the particular post I was looking for.
I have a cub with out a generator and the price of a rebuild with a voltage regulator is more than I want to spend and so I thought I would try something new and see how it goes and learn something at the same time.
I am also thinking of an alternator on Our VAC at school since the Gen is froze up solid.
I am looking for the correct 6 volt generator to use. I know there is one somewhere. I will going to NAPA to get it so if there is a number that would be great.
Thanks a bounch
I have a cub with out a generator and the price of a rebuild with a voltage regulator is more than I want to spend and so I thought I would try something new and see how it goes and learn something at the same time.
I am also thinking of an alternator on Our VAC at school since the Gen is froze up solid.
I am looking for the correct 6 volt generator to use. I know there is one somewhere. I will going to NAPA to get it so if there is a number that would be great.
Thanks a bounch
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 6 volt alternator
Get the Delco clone 12 volt single wire alternator. Will fit under the Cub's hood with out cutting hood. Guessing, using school account for purchase, probably cost you around $36-. Lot of information on subject on this site. I think you will find the 6 volt alternator over priced.
On tractors bigger than the Cub, the alternator installation is usually a piece of cake.
On tractors bigger than the Cub, the alternator installation is usually a piece of cake.
I have an excuse. CRS.
-
- Team Cub
- Posts: 17242
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: 6 volt alternator
One of the main advantages to converting to a 1-wire alternator is that you are using a common item that is readily available as an inexpensive rebuild. Although 6-volt alternators exist, they are neither common nor inexpensive. I imagine you would find a 6-volt alternator to be more expensive than any other alternative for a charging system.
Have you researched the original generator number for the VAC? It may be relatively common, as 6-volt generator go. I presume this is supposed to be a teaching excepience for the kids. Have them take the frozen generator apart, clean it up and decide what all is wrong with it. After that, the conclusion may be to to toss it or trade it in as a core. But give them the opportunity to learn.
Have you researched the original generator number for the VAC? It may be relatively common, as 6-volt generator go. I presume this is supposed to be a teaching excepience for the kids. Have them take the frozen generator apart, clean it up and decide what all is wrong with it. After that, the conclusion may be to to toss it or trade it in as a core. But give them the opportunity to learn.
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: 6 volt alternator
You mentioned 6 volt alternator earlier in the post, they are rare, and the last time I checked fairly pricy. Much cheaper to change over to 12 volts if you want an alternator, or find a used generator if wanting to stay 6 volt.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- challenger
- 10+ Years
- Posts: 1087
- Joined: Sun Apr 18, 2010 6:22 am
- Zip Code: 21742
- Tractors Owned: 1955 F Cub (2)
1952 F Cub
1948 F Cub
2155 JD
216 JD - Circle of Safety: Y
- Location: Hagerstown MD
Re: 6 volt alternator
Jim Becker wrote:I presume this is supposed to be a teaching excepience for the kids. Have them take the frozen generator apart, clean it up and decide what all is wrong with it. After that, the conclusion may be to to toss it or trade it in as a core. But give them the opportunity to learn.
I agree with Steve's remarks completely. There is no way they should toss the generator without making sure it is dead and can not be rebuilt. Chances are the bearings are gummed up and stuck from sitting. I hate the toss and replace mentality of some mechanics today. Remember, these items were were made to be rebuilt and not thrown away. They need to take the generator apart and check the continuity of the field and armature windings. If the windings are sound and not shorted out chances are the rest of the generator can be rebuilt quite reasonably.
- Bus Driver
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Re: 6 volt alternator
It is highly unlikely that NAPA offers 6 volt generators, especially for tractors. National Quick Start at one time offered conversion kits for Delco for 6 volt output. Check out their full website.
http://store.alternatorparts.com/repair ... its-2.aspx
http://store.alternatorparts.com/repair ... its-2.aspx
Luck favors those who are prepared
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: 6 volt alternator
If cost is a factor you have 2 choices 1. Repair what you have , this will most likely be the more costly
of the 2. And 2. change it over to a one wire 12 volt.
No way would I ever consider a 6 volt Alternator.
Boss
of the 2. And 2. change it over to a one wire 12 volt.
No way would I ever consider a 6 volt Alternator.
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: 6 volt alternator
Apparently I am the proud owner of a 6v alternator. It is on the shelf in the barn. Haven't decided what to do with it. My preference would be to stay with the 6v system. You should be able to pick up a good used 6v genny/cutout from one of our site sponsors like JP Tractor Salvage or via a want in the Wanted Cub Items forum. also has them for a reasonable price but you do have to pay attention. Once you have a 6v genny and cut-out or voltage regulator, they are rebuildable usually for a very reasonable cost. I send mine out to my local AC Delco Service Centre. Very economical.
Tbe only valid reason to convert to a 12v system is when the genny and regulator are missing. And that is usually because folks are looking at new parts only for the most part. Overlooking good used parts is a waste of a good option. Suggest checking that out before you make a major decision.
Tbe only valid reason to convert to a 12v system is when the genny and regulator are missing. And that is usually because folks are looking at new parts only for the most part. Overlooking good used parts is a waste of a good option. Suggest checking that out before you make a major decision.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 459
- Joined: Tue Oct 21, 2008 7:50 pm
- Zip Code: 62854
- Tractors Owned: '36 JD B,
'40 and '46 Farmall H,
'50 Ford 8n '55 Farmall Cub,
'55 JD 70 allfuel,
lots of other toys - Circle of Safety: Y
- Location: kinmundy illinois 62854
Re: 6 volt alternator
I have a cub on a 6v alternator. Alternator cost me $60, brand new. I went w/ 6v because I already had 6v lights, a new 6v battery, and 6v. ignition system.
Since now I have everything on the dreaded magneto (Sorry Boss, I like'em.. they aren't so bad when you don't try to understand how they work!), I might have considered a 12v alternator.
If you have to buy a new battery I'd stick w/ a 12v one wire set up. It seems like 6v batteries are harder to find and more pricey than 12s. For the ignition, you'd need either a new coil or a resistor. A Delco Remy 10SI will fit w/ no modifications. IF you want it as 6v, any competent rebuild shop can make it one. Look back at some previous articles on mounts to see a good, clean way to install one.
Since now I have everything on the dreaded magneto (Sorry Boss, I like'em.. they aren't so bad when you don't try to understand how they work!), I might have considered a 12v alternator.
If you have to buy a new battery I'd stick w/ a 12v one wire set up. It seems like 6v batteries are harder to find and more pricey than 12s. For the ignition, you'd need either a new coil or a resistor. A Delco Remy 10SI will fit w/ no modifications. IF you want it as 6v, any competent rebuild shop can make it one. Look back at some previous articles on mounts to see a good, clean way to install one.
I've never met a tractor I didn't like....but I have found some that were greatly annoying....
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
- Contact:
Re: 6 volt alternator
I am not apposed to a 12 v conversion, I just don't want to have to buy new lights, coil, and what not. I have all kinds of 6 v lights and coils. I do have a 12v alternator I will use on my demo project most likely just because it came with it. I just see more money to go the 12 v route verses staying with the 6 v in my case. I thought I read somewhere Hitachi made a 6 v alternator and that is what has me curious about going this route. Like I stated earlier, I did not get a generator with this tractor and so I do not have a core to rebuild at this time. I really don't want to spend $40 or more on a core plus a rebuild of $150 or more and then add in all the other things I have to change over like I stated.
I will look into both when I go to NAPA Friday after school and let everyone know what I went with. I have this tractor hot wired for now and would like to get it in shape for spring as I would like to put a sickle mower on it.
Thanks
I will look into both when I go to NAPA Friday after school and let everyone know what I went with. I have this tractor hot wired for now and would like to get it in shape for spring as I would like to put a sickle mower on it.
Thanks
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: 6 volt alternator
Jason:
I think Kelley might have the solution for you - pretty simple it seems to me.
The 10SI is one of the most common and are rather inexpensive. Any good AC Delco Service Centre can make it 6v. I would think any good reputable Auto Electric repair shop should be able to do this. Probably the most economical way to get a 6v alternator.
IIRC, Bruce told me that my 6v alternator is indeed a 10SI.
I think Kelley might have the solution for you - pretty simple it seems to me.
sgtbull wrote:A Delco Remy 10SI will fit w/ no modifications. IF you want it as 6v, any competent rebuild shop can make it one. Look back at some previous articles on mounts to see a good, clean way to install one.
The 10SI is one of the most common and are rather inexpensive. Any good AC Delco Service Centre can make it 6v. I would think any good reputable Auto Electric repair shop should be able to do this. Probably the most economical way to get a 6v alternator.
IIRC, Bruce told me that my 6v alternator is indeed a 10SI.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Cub Pro
- Posts: 7504
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: 6 volt alternator
Jason (IL) wrote:I am not apposed to a 12 v conversion, I just don't want to have to buy new lights, coil, and what not. I have all kinds of 6 v lights and coils. I do have a 12v alternator I will use on my demo project most likely just because it came with it. I just see more money to go the 12 v route verses staying with the 6 v in my case. I thought I read somewhere Hitachi made a 6 v alternator and that is what has me curious about going this route. Like I stated earlier, I did not get a generator with this tractor and so I do not have a core to rebuild at this time. I really don't want to spend $40 or more on a core plus a rebuild of $150 or more and then add in all the other things I have to change over like I stated.
I will look into both when I go to NAPA Friday after school and let everyone know what I went with. I have this tractor hot wired for now and would like to get it in shape for spring as I would like to put a sickle mower on it.
Thanks
Buying those parts is offset by the lower price, and longer warranty, of the 12 volt battery. If you need a battery, its the way to go. (Coming from a cheap #^&%$, who has very few charging cubs, and uses battery chargers, between uses.) Ed
-
- 10+ Years
- Posts: 97
- Joined: Thu Dec 15, 2011 4:19 pm
- Zip Code: 49910
- Circle of Safety: Y
Re: 6 volt alternator
Friend of mine was having trouble with his 6v system. I suggested he convert to 12v Alt. Not understanding what was involved he opted for keeping everything 6v. Bottom line, almost $200 later and still replacing parts. I'll convert to 12v every time.
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 6 volt alternator
You will probably need to change the amp meter, most original were only rated at 20 amps. Alternators put out considerably more than 20 amps.
12 volt alternator, on hand. 6 volt coil, on hand, with a $4.00 Chrysler ballast resistor. Two or three light bulbs. New amp gauge. Diode - depending on which type alternator. Use existing wiring if in good condition. $20 to $30 if you make your own brackets, plus battery.
12 volt alternator, on hand. 6 volt coil, on hand, with a $4.00 Chrysler ballast resistor. Two or three light bulbs. New amp gauge. Diode - depending on which type alternator. Use existing wiring if in good condition. $20 to $30 if you make your own brackets, plus battery.
Plus cost of voltage regulator.I really don't want to spend $40 or more on a core plus a rebuild of $150 or more and then add in all the other things I have to change over like I stated.
I have an excuse. CRS.
Who is online
Users browsing this forum: Dave Downs, Majestic-12 [Bot] and 23 guests