Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
I have received a new seal for the retainer for the transmission input shaft bearing. As some have noted, the seal is a bit loose. I can fix that with sealer, punch and washers. However, my primary concerns are that the seal sure has less metal than the original, looks cheaper and is 1/4 inch instead of 3/8 inch.
The photo of TM Tractors item 528810R91 which contains retainer and seal also appears to reflect a seal with less metal than the original and a less thick seal. The seal does not appear to fit flush in the retainer as the old 3/8 seal does.
Am I seeing reality of today's "cheap stuff" or am I missing something? Bottom line, should my new seal be okay as long as I install properly in the retainer?
- Posts: 10
- Joined: Sat Dec 08, 2012 7:19 pm
- Zip Code: 27292
should be fine , I have had no problems as long as you do as I said in the other thread
OH and yes things are made cheaper now by far
IN GOD WE TRUST
All others pay cash
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
- Cub Pro
- Posts: 9827
- Joined: Mon Oct 24, 2005 8:35 pm
- Location: VA. Randolph
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
Return to Farmall Cub
Who is online
Users browsing this forum: Scrivet, wrz and 10 guests