What is it or Wazzit? Have a mystery item you want help figuring out its use. . . this is the place to ask.
Moderator: Team Cub
12 posts • Page 1 of 1
Vern, I think I'm only seeing only the top half of the picture. Hood and a little bit below it. Can you post a link?
"We don't need to think more,
we need to think differently."
A sprocket for a big chain looks like
IN GOD WE TRUST
All others pay cash
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
Some sort of sprocket drive, but the thickness of the cylinder and the shape of the teeth do not appear to be right for a chain. Ad says it was used mostly for running a buzz saw, so I am thinking some kind of cogged belt.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
A chicken plucker!!
'41 A, '49 Cub, '58 LoBoy,'61 LoBoy, way to many attachments, '22 Centerdoor Sedan, '24 Ford T Roadster, '25 Ford TT, '24 C Cab, '13 Touring, '24 Model T Snowmobile, '26 Touring
From the "why do I have a picture of this?" file. A slightly less deteriorated paper pulley. It has the same partial pulley width round metal interior and I would suppose there has to be something in there to keep the paper from spinning on the metal part.
edit for clarification
I know why you got that picture. Thats the one at Casey farm you was goin to get for a fixer upper aint it . LOL Lil Bro always did like a challenge
That is a sprocket for stamped steel chain. It looks odd because it only has teeth for every othert link of the chain. I don't know what specific machine it was for. I might be able to tell with a part numbert.
I think if it were a cog pulley the cogs would be in the center of the flat surface not next to one edge where only one side of the chain would be supported, or the whole pulley would be narrower so there would be no difference.
Edit: I used the term cog; sprocket is what I meant
Stamped steel chains are supported by the cross bars, not the edges of the chain. I'm sure the edge of the chain doesn't run on the side we can't see either. The sprocket has however much offset was required to align with the other sprocket it drives.
12 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests