Sat Feb 23, 2013 7:23 pm
For the 189 and 193, the parts manual diagram makes it look like the "eye" is flat stock (square corners, not round). All the pictures I have seen (like from TM) show the "eye" portion to be round (like made out of rod). Was the "square" version early, and the "round" version later?
Sat Feb 23, 2013 7:26 pm
I have a bunch of both. From what I have been able to figure out the square head is the earlier version. I am kinda partial to the square ones.
Sat Feb 23, 2013 7:29 pm
Bob, they have other strange bolts called, clipped head,elliptical, and special plow bolts, take a look at http://www.sloanex.com
Last edited by tst on Sat Feb 23, 2013 7:47 pm, edited 1 time in total.
Sat Feb 23, 2013 7:35 pm
that link takes you to http://www.ex.com
. Not Sloan. Bad link I think.
Sat Feb 23, 2013 7:48 pm
oops, fixed it
Tue Feb 26, 2013 12:47 pm
Looked to me like the round dogbone was actually cast, then the bolt part threaded?? Dusty B
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.