This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Square head rim bolts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 23
- Joined: Sat Feb 02, 2013 4:09 pm
- Zip Code: 13037
Square head rim bolts
On my 52 cub that I am redoing, I have removed the rims from the centers for cleaning/repainting. Some of the 8 square headed 1/2", fine machine thread bolts that fasten the rims to the centers are rusted to the point that the diameter of the bolt is significantly reduced. Where can I get new, replacements?
- Peter Person
- Cub Pro
- Posts: 4559
- Joined: Fri Nov 18, 2005 4:27 pm
- Zip Code: 06076
- Circle of Safety: Y
- Location: CT, Stafford Springs
Re: Square head rim bolts
Steiner Tractor Parts http://www.steinertractor.com/IHS822-bolt--nut-rear-rim-to-center?&TF=C30B10B5ABB6
$4.95 each
$4.95 each
1957 Farmall Cub "Emory", Fast-Hitch, L-F194 Plow & Colter, L-38 Disc Harrow, Cub-54A Blade, Cub-22 Sickle Bar Mower, IH 100 Blade
-
- Team Cub Mentor
- Posts: 4128
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
Re: Square head rim bolts
If you have a JD dealer close they can get them for a lot less. I can't remember the part number and I'm not home to check it. Somewhere in here is another thread on square head bolts and I listed the part number in it.
-
- 10+ Years
- Posts: 23
- Joined: Sat Feb 02, 2013 4:09 pm
- Zip Code: 13037
Re: Square head rim bolts
Thanks a lot. Just what I was looking for.
- Barnyard
- Team Cub
- Posts: 24268
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Square head rim bolts
John Deere part number is 08h4465. They should be just under $2.00.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
- ricky racer
- 10+ Years
- Posts: 6336
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Square head rim bolts
Going to John Deere to save money on parts for your Farmall, who'd a thunk it.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
- Barnyard
- Team Cub
- Posts: 24268
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Square head rim bolts
ricky racer wrote:Going to John Deere to save money on parts for your Farmall, who'd a thunk it.
Yeah, I hate to say it.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Team Cub
- Posts: 11854
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Square head rim bolts
At least they don't come painted green.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- Clint Carter
- 10+ Years
- Posts: 505
- Joined: Thu Jan 06, 2011 5:46 pm
- Zip Code: 27265
- Tractors Owned: Ford 2000
78 Cub Fast Hitch Red
78 Cub Red
76 Cub Red
75 Cub (Not Long Stripe) Yellow
70 Cub Yellow Fast Hitch
53 Cub 151 Disk Plow
69 Cub - Circle of Safety: Y
- Location: NC
- Bill Hudson
- Team Cub
- Posts: 9522
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: Square head rim bolts
As I recall, Clint, they are fine thread. If that is wrong, others will be along soon to correct the error.
-
- 10+ Years
- Posts: 23
- Joined: Sat Feb 02, 2013 4:09 pm
- Zip Code: 13037
Re: Square head rim bolts
We have a local JD dealer here in town. Will check and order/buy, assuming they are the fine thread.
-
- Team Cub Mentor
- Posts: 4128
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
Re: Square head rim bolts
They are fine thread.
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Square head rim bolts
I bought a set from Mcmaster Carr online. Coarse thread though.
-
- 10+ Years
- Posts: 678
- Joined: Fri Feb 16, 2007 11:28 am
- Zip Code: 75959
- Location: Tx., Milam
Re: Square head rim bolts
If you use John Deere bolts, reckon the wheels will fall off?
-
- 10+ Years
- Posts: 23
- Joined: Sat Feb 02, 2013 4:09 pm
- Zip Code: 13037
Re: Square head rim bolts
On my way home today, I stopped at our local John Deere dealer and ordered the square head bolts for my cub. They are fine thread, proper size(1/2" x 2") and best of all, $1.50 each in packs of 5. I ordered 2 packs (I have 4 cubs) and like to have spare parts. Thanks for the good information.
Who is online
Users browsing this forum: randyny and 43 guests