Tool TimeModerator: Team Cub
Forum rules
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice. IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
10 posts
• Page 1 of 1
Tool Time
Finally getting around to this!
 If you were an attendee at DSCF, we can talk tools.Dale Shaw, is this yours, by chance?  Someone left a 1/2" Craftsman gear wrench and a 1/2 drive extension.  If you check your tool box and find a couple of 1/2" drive sockets like the ones missing here, they might belong to me.   These are my findings at the moment. Could be some more a bit later. Roy In the middle of every difficulty lies opportunity. - Albert Einstein
Roy Edenfield Deep South CubFest February 14 & 15, 2014
Re: Tool Time
I think the yellow extension matches a certain yellow Lo-Boy. Also wondering what size fits between 9/16 and 5/8 in a Craftsman socket set.
Re: Tool Time
I think you are probably correct on the yellow one. The sockets are not in order. Should have arranged them before I snapped the pic. In the middle of every difficulty lies opportunity. - Albert Einstein
Roy Edenfield Deep South CubFest February 14 & 15, 2014
Re: Tool Time
Yes the extension is Dirtyreds.
In my line of work
" EVERYBODY GOES HOME THE NEXT MORNING"
Re: Tool Time
Yep Roy, the "make it or break it" pipe wrench is mine. It is a 24" wrench and when you slide a 2" black pipe, 4 to 6 foot long over that handle, you will either break it loose, or break it in half.
When I worked in the oil patch in OK after high school, we had a 60" wrench and we used a 20' section of 4" pipe for a cheater.  Took several of us on that big surface pipe, cant remember if it was 12" or 18" pipe.Dale Shaw
TN Cub Rescue- Out of the Hedgerows and Barns, and back into the Fields and Gardens where they belong. Today's generation is so used to getting everything IN a box, they can't think OUTSIDE the box
Re: Tool Time
Mr. Roy the 1/2" wrench is mine. I am also missing a Craftsman ajustable wrench.
I have your 3/8" Craftsman wrench with the red paint. I also have a set of red handled pliers that are made in China that looks just like my Craftsman set that has the red rubber grips on the handle. That is all I have that is not mine and I think, all I am missing. "I ain't believing this!"
Re: Tool Time
extension is mine and the red handled might be mine i got somebodys craftsman srewdriver.you know this means we need to have another fest to swap tools
He that tilleth his land shall be satisfied with bread: Proverbs 12:11
Re: Tool Time
Hey, do you think a Mini-Fest is in order? In the middle of every difficulty lies opportunity. - Albert Einstein
Roy Edenfield Deep South CubFest February 14 & 15, 2014
Re: Tool Time
how bout a minifest in april? say Alapahoochee? and bring ole HeeHaw with u!
He that tilleth his land shall be satisfied with bread: Proverbs 12:11
Re: Tool Time
Who is ole HeeHaw?
If you're gonna dream or steal, do it BIG
The best things in life aren't things. 1951 Cub 1963 Corvair lots more junk
10 posts
• Page 1 of 1
Return to CubFest and Tractor Show Announcements & Discussions Who is onlineUsers browsing this forum: No registered users and 2 guests |
|
