which alternator?

[dirtyred]

does anybody know the part number(s) for the one wire gm alternator that will fit under the hood of a 74? i know u can use a hitachi but i aint skilled enough to put in the diode that is needed. thanks

[Eugene]

Just walk in to your favorite auto parts store and tell the old guy behind the counter what you want.

Different auto parts store name, more than likely different part number for the same item.

[Wakulla Bill]

This one worked on my 52. Napa # 213 401 1SW
Bill

[BigBill]

I been upgrading the 10si alternators to a one wire altenator and raising the output at the same time. There are kits available on the net for the 10si altenators for upgrading them from 60amps all the way up to 105amps along with the one wire parts/directions too.

[Dale Shaw]

here is a link to Boss's how to
viewtopic.php?f=140&t=66986

When using the Napa # 213 401 1SW one wire alternator it kicks in at a lower RPM.

[ScottyD'sdad]

I been upgrading the 10si alternators to a one wire altenator and raising the output at the same time. There are kits available on the net for the 10si altenators for upgrading them from 60amps all the way up to 105amps along with the one wire parts/directions too.

Bill, why would you want 105 amps? 60 is probably twice the output of a cub generator. Ed

[Tezell]

David,

The Napa one has worked well for me. I have purchased 6 of them total. 3 that I own and 3 for someone else. I have had zero problems.

Are you putting it on the one you were working on at DSCF?
You will need one of Clint's brackets.

[Boss Hog]

The NAPA alt 213 401 1SW works as it should, I can not verify the other brands. There coil works great too.
Boss

[Matt Kirsch]

Oh don't sell yourself short. If you're skilled enough to hang the alternator on the tractor you're certainly skilled enough to wire in the diode.

[dirtyred]

gonna try the napa one hopefully this weekend I certainly hope i have a big enuff hammer