Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
13 posts • Page 1 of 1
My mother inherited a 1949 Cub tractor. Now that we have it running we are in search of implements to garden. She says that it needs 3 pt plows. We have talked to local tractor companies but without any luck. I found this website when on Amazon.com and hope that someone can help us out. Thank you.
Ruth, three point plows will not work on a Cub. What you need for a Cub is a model 193 single point plow unless you have a fast hitch, then you would need a model 194 single point. A Cub will not handle more than one plow at a time.
Sea salt is healthier only because it gets stuck in the holes of the shaker and you can't actually put it on your food.
Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info.
Does your cub have a 3 point hitch? If so, it would be unusual. Post a picture of the rear end of your tractor--the hitch mechanism--and members here will tell you the type of plow you need and where you might find one.
I looked up your zip code and see that you are northern Louisiana. There are several great Cubbers not far from you that can help you find a plow once it is determined what kind you need. Also, welcome to the Forum.
Does the back of your tractor look like this:
The first picture is the usual drawbar, the second is the fast hitch that takes implements designed for it. There are aftermarket 3-point hitches made, but they are expensive and not terribly practical for use on Cubs.
Edit: photos courtesy of TM Tractor
"We don't need to think more,
we need to think differently."
G\day to you and congrats to your Mom on her inheriting her '49 Cub
Suggest that both you and Ruth spend some time reading the links below. Pay special attention to the McCormick Farmall Cub Operator's Manual 5-1-49 and the implements for the Cub in the Cub Implement Manuals section. As Bill mentioned you need a Cub-193 Moldboard Plow 11-20-51. 3 point equipment will not fit a Cub. Cub specific implements are essentially required but are not hard to find.
Enjoy the Cub, post pics when you can cause we like em a lot
Thank you for your questions. I will take a picture of the rear end of the tractor and post so that all of you can view. My mother is 81 and her memory is not so good. She said that she needs a 3 pt. plow. Bob, I live in southeast Louisiana near the toe of the "boot". Thank you to all of you for your input.
That tractor doesn't have a 3 point system. You'll need a 193 moldboard plow and a drawbar as Rudi mentioned or a 152 belly plow.
Looks like they might be needing shanks and shovels/plows for the cultivator frames?
"It is impossible for a man to learn what he thinks he already knows." -Epictetus
252646 & 221525. 195897 (Gone but not forgotten!)
to clarify just a little more, your cub has the frame for a cultivator for cleaning weeds between rows of plants. Some people do call them plows, but an actual plow is for turning the soil in preparation to disking and planting. If you will follow this link it shows a cub with the attachments that were available for the early cubs. Of course there are a lot more attachments to fit now than there was then.
http://home.centurytel.net/ejpuckett/19 ... %20upload/
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
What parts are you looking for? That hasn't been clarified yet. You can place an ad in the wanted section of this forum
I think they're looking for standards, clamps and sweeps/shovels.
MD, Deep Creek Lake
"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
13 posts • Page 1 of 1
Who is online