Hi All,
Is there a replacement seal available for the fan hub? Is it replaceable or what are the options for a fan with some leakage, and can a heavier oil be used?
Thanks, Sam
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
49 cub fan seal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: 49 cub fan seal
There is not supposed to be a seal there, and I suggest staying with 30wt or 10w30 oil. There was an 0-ring at the factory to prevent leakage during shipping, but it is not replaceable. follow the directions in the manual to lubricate it and you will be fine. If you do not yet have a manual, use the crank to turn it with the screw to the right side. fill it with oil to the hole, then turn it 3/4 turn till the screw hole id down and let it drain. there is a standpipe in it that drains it to the proper level. turn the screw hole to the right side and replace the screw.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Who is online
Users browsing this forum: No registered users and 48 guests