Today i tried to fire up the farmall after sitting stil for i think a long time.
New plugs,leads,ignition coil and battery.
I poured some gas in the carbu through the feeder pipe and tried to start. Nothing
Shot some brake cleaner in to the carbu air inlet nothing
Removed a spark plug and shot some brake cleaner in there, refitted and a little pouf.
Then i started with my hand on the airintake side of the carbu (air filter is disconnected) and it workt a little.
I tried again and it started,however it only runs with the coke full open and the gas lever at the starting position.
Touching the gas ore choke and it stalls, putting little shots of break cleaner in it and it stays running.
Looking at the screws off the carbu the bowl seems to be removed a lot of times, screws are worn.
Wath now a new carbu ( expensive here in belgium)
Any andvice welcome