Post your introduction and "get to know me" information in this forum.
Moderator: Team Cub
12 posts • Page 1 of 1
hi folks, i'm jake, i have a 1948 cub that i'm gonna start rebuilding in the next few years, and i'm here to learn some stuff about my little project.
My grandpa gave it to me a few years ago and it's been sitting waiting for me to finish highschool, so i have time to work on it.
Glad to have you with us Jake. We will be glad to help you any way we can with your project. Is it running?
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
Welcome to the forum jake.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Welcome to the Forum Jake. There are manuals available for viewing or downloading and lots of good info that you can find here.
"We don't need to think more,
we need to think differently."
G'day to you and boy, having Granpa's Cub is a real cool honour. Take care of it and get it redone. There are lots of folks here who will be able to help you with that project. Suggest you keep up with homework and do some on your Cub - follow the links below and you will find the Owner's Manual, Service and Part's catalogs. These you should become familiar with if you are really going to delve into your Cub and do a restore. There are lot's of other resources from How To Fix that to How to Make a part. We like pics ... so post some of your Cub
thanks for the welcomes, it is not running, i think i'm going to have to do a complete tear down, it hasn't run in over 10 years, dad said that when he was a kid my grandpa bored the motor out a couple times, so we might have to bore and sleeve it, or get a new block.
i will definitely go over the manuals.
off-topic but, is there a company that makes accurate reproduction parts for the cubs? i need a set of front rims, one of my current rims rusted through a little. (about a quarter sized hole)
thanks for the info, i'll have to check.
i was reading a little about electrolysis, i might have to give it a shot after i get back from my trip, maybe i can save most of my tractor by getting the rust off, and priming and painting the parts real good.
Welcome to the forum. A cub project - keep and eye on for what you need, post wanted items on here and watch ebay.
Have you tried to start the motor? There are a lot of cub doctors on here with some excellent advice, and a lot of times those old cubs can be brought back to life with a little bit of cleaning and adjusting. Get it running then see what you need.
Guiena, 1951 Farmall Cub; Jumping Willy, 1949 Farmall Cub.
Since it has sat a long time, be sure and prime the oil pump before trying to turn over or start. Congrats on inheriting the family Cub.
"It is impossible for a man to learn what he thinks he already knows." -Epictetus
252646 & 221525. 195897 (Gone but not forgotten!)
thanks, i will.
no, i'm not sure if i want to try.
thanks for the info, i will.
i have a question, i pulled the differential (?) cover where the PTO comes out, drained the fluid, and cleaned up the covers and bolts, in the manual, what is this called?
i need to replace the fluid and i'm not sure how much i need.
EDIT: here the thing i'm talking about.
12 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest