Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Hello everyone, I'm new to the forum, looking for tips setting up my cub. I have a sn# 2224** red square nose, 6volt with a 6' belly mower. It runs great and has no issues other than cracking tires. I don't have a fast hitch or any hydraulic set up in the rear, but do want to use it to disc my garden. I know the plow and cultivators will hook up in the center but would like to set it up to pull a disc, just not sure about the set-up, not having hydraulics or 3 point hitch like on the 8N I used to have. Suggestions are appreciated as I currently only have the mower, a plow, partial set of cultivators and wagon.... still need to purchase or modify a disc. Thanks!
To clarify.... my cub does have hydraulic lift, just no arm in the back to lift rear implements... also curious as to median prices on 8.3 - 24 tires as I need to replace one or both in the near future. I live north of Charlotte, NC so if anyone has a line on getting replacement tires or even finding good used tires locally, let me know. Thanks again.
G'day to you and congrats on the '63. Suggest you read the International Cub Lo-Boy Operator's Manual 8-1-63. The rear rockshaft and the rod are available either from one of our forum sponsors - JP Tractor Salvage or from one of our members - you can post a want ad in the Wanted Cub Items subforum if you wish.
There are lots of resources available for our members and I would suggest you take some time, find a comfy chair, a cup of coffee and spend some time perusing the links:
As far as tires - check out these two - Tucker Tire and Miller Tire - you can find them on
I found that my local tire shop surprisingly has US made Carlisle's and Titan tires for both the front and I think the rear if I understood them properly.
Manuals, top of page. Check out the 23A disc harrow. You don't need hydraulics to operate it.
Check with your local tire dealers. They will be able to get the tires and tubes. Price, Unknown. Tire prices have gone up considerable since I purchased rear tires for my Cub.
Used tires. Usually cheaper in the long run to purchase new tires.
I have an excuse. CRS.
to what Eugene said. The 23A disc harrow is adjustable to set the angle (i.e. aggressiveness) of the discs. When transporting to/from the field, set the discs to run parallel with the tractor. My Cub (w/o fasthitch) doesn't lift the 23A to transport, but will leave minor cuts along the way.
My 1945 Farmall H makeover
Thanks for the information.... I have the original manual for the cub(its not a low boy, just a regular cub) but I am enjoying looking through the many resources on the site! Always wanted a cub, this one was my Dad's, even though we used old Fords growing up. I think I know where a 23A might be, just wasn't sure about getting to the field without making a mess of my yard, but I'll check it out. The attachments for the cub seem a bit more complicated than just the standard 3 point hitch, so it will take me awhile to figure out what I have and what I need. I like the fact that people seem to make a ton of their own implements for these things and will be trying to fabricate some of my own. I appreciate the help along the way and thanks again!
You can often find cheaper tire prices by shopping online but remember that you have to pay $$$ to SHIP the tires to you. Shipping usually kills any price advantage of buying online when it comes to the big bulky rear tires.
Used tires is a fickle market. You're depending on being able to find a particular size of tire, in the right condition, at the right price, not too far away, right when you need them. A lot has to come together perfectly for that to happen. If you can wait, you can eventually find an acceptable deal on usable used tires within driving distance, but if you need them RIGHT NOW you've got to be exceedingly lucky.
Left rear tire is leaking out through the side wall crack, it holds air for a day or two at a time so I can still use the tractor as it is....found a slightly larger tire on the same size 7" rim (mine tire is 8.3-24 and this one is 9.5 -24) for $80 about 70miles from here, may go get it in place of spending $175-200 on a new tire right now...
Nice! Tractor! would like to see a picture iv got a 64 Model i live over to Greenville NC bought mine outta edenton
for 1200.00$! runs like a Swiss watch! you can find the rear lift rockshaft arm fairly easy at the most one would be under 200$
an the Disk that you would need a IH L-38 Disk for a lift type an the Plow which are fairly easy to find is the 193 Plow
Here are photo's of what im talking about along with my 64!
Tractors are like watermelons..Eat the red and throw away the green!!
Brendan Dixon Greenville NC
1964 Farmall Cub #223883
1964 Farmall 140 #27512
Great looking machine, you got a heck of a deal! I'll post up some pictures of mine soon.
My 63 has been a mower for most of its life, just now wanting to branch out to plowing and working up the garden. It is all original, needs a few things like the rear light and the seat re-covered, but it is in pretty good shape. It has a new clutch, just changed all the fluids and greased it up.... cranks easy every time. I imagine it will be easy to get carried away with this tractor.... so many possibilities and accessories... just going to have to take my time collecting what I need I guess....the rockshaft arm will be at the top of the list though!
I am up near Blowing Rock NC. There is a lot of knowledge here and the guys are glad to help.
Member Chapter 42 IHCC
1970 Farmall Cub
1946 Farmall B
1942 Farmall M
1200 Cub Cadet
Nice, you have a pretty rare Cub.
I have a couple of 64's. One has been patiently waiting for me to work on it....
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
WELCOME! There are quite a few of us here in NC...I am in Chapel Hill...and we are here if you have any questions. A couple guys are fairly close to you.
If you are around May 31-June 1, there is a Cubfest in Randolph, VA, at Boss Hogs, one of the most experienced Cub guys around. He often has lots of parts, and may have your rear rockshaft. You learn a lot at these gatherings, and generally if you bring your cub, there will be a bunch of folks willing to help you with your projects.
Look forward to seeing some photos and perhaps seeing you at the VA Cubfest!
Nice Cub! WOW!!! Never seen a 3160 mower deck from a number series Lo Boy on a Cub. That took some fancy fabrication! Yea, you're missing a few things to be able to plow. Looks like you're missing the rear rockshaft and lift rod, rear drawbar and drawbar brackets.
1951 Farmall Cub, Cub Cadets 102, 104, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
Who is online
Users browsing this forum: GenrlCub and 5 guests