This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

planter tool bar clamp brackets

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
clodhopper
10+ Years
10+ Years
Posts: 807
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50C deck
Circle of Safety: Y

planter tool bar clamp brackets

Postby clodhopper » Wed Mar 27, 2013 5:55 pm

Anyone know a good source for these? I have the clamps of course, but I need the block and clamp pieces that actually go between the shank and tool bar.

SPONSOR AD

Sponsor



Sponsor
 

tinnerjohn
10+ Years
10+ Years
Posts: 754
Joined: Sun Jan 20, 2008 5:52 pm
Zip Code: 44491
Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
Circle of Safety: Y
Location: West Farmington, OH

Re: planter tool bar clamp brackets

Postby tinnerjohn » Wed Mar 27, 2013 6:46 pm

I'm not sure if these are what your looking for, Agri_Supply has them in their April Catalog, Part No. 82406. Maybe one of our resident parts guys have some too. John

User avatar
clodhopper
10+ Years
10+ Years
Posts: 807
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50C deck
Circle of Safety: Y

Re: planter tool bar clamp brackets

Postby clodhopper » Wed Mar 27, 2013 7:23 pm

The clamps are the 3 piece clamps used to attach hillers or sweeps to the crossbar on the planter runner setup, not the clamps used with the 144 cultivators. I tried to post a pic but I am on the fart smone instead of the computer.

tinnerjohn
10+ Years
10+ Years
Posts: 754
Joined: Sun Jan 20, 2008 5:52 pm
Zip Code: 44491
Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
Circle of Safety: Y
Location: West Farmington, OH

Re: planter tool bar clamp brackets

Postby tinnerjohn » Wed Mar 27, 2013 7:38 pm

I think those are what you are looking for. Don't know about the quality, but they just showed up in the catalog this month.

User avatar
clodhopper
10+ Years
10+ Years
Posts: 807
Joined: Sat May 07, 2011 8:20 pm
Zip Code: 27526
Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50C deck
Circle of Safety: Y

Re: planter tool bar clamp brackets

Postby clodhopper » Wed Mar 27, 2013 7:44 pm

My apologies tinnerjohn....you know I assumed.... that the 144 clamps were what you were referring to. Thanks for posting that. I have the clamps and only need the block, but I can probably buy it all just as cheap

Plus I am only about 20 miles from their Garner NC store.

tinnerjohn
10+ Years
10+ Years
Posts: 754
Joined: Sun Jan 20, 2008 5:52 pm
Zip Code: 44491
Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
Circle of Safety: Y
Location: West Farmington, OH

Re: planter tool bar clamp brackets

Postby tinnerjohn » Wed Mar 27, 2013 8:49 pm

No problem. Let us know if how they look/hopefully work out. I've bought sweeps and other stuff from them in the past, always great service, but I've seen some negative comments lately about the company. John

Billy Fussell
10+ Years
10+ Years
Posts: 678
Joined: Fri Feb 16, 2007 11:28 am
Zip Code: 75959
Location: Tx., Milam

Re: planter tool bar clamp brackets

Postby Billy Fussell » Thu Mar 28, 2013 10:15 am

I don't have a catalog handy to look at the number, but if it is what I believe you are talking about, I bought one about 5 or so years ago, and use it every year. No problems. Works and fits good.

Billy

CapeCodCubs
10+ Years
10+ Years
Posts: 3328
Joined: Fri Jan 11, 2008 5:30 pm
Zip Code: 02747
Tractors Owned: .
1948 F Cub Fast hitch
1949 F Cub
1950 F Cub Fast hitch
1965 Loboy Fast hitch
1966 Loboy with 1000 loader
1976 International Cub
several walk behind garden tractors
(20) FastHitch implements
tons' of cultivating and planting stuff
C-16 Cub Middlebuster
(2) A33 Cub bean harvester
NOS Planet Jr. planter
172 planter, large combo hopper, 101A fertilzer hopper
Cole 250# fertilizer hopper with chain drive.
Location: MA, Dartmouth

Re: planter tool bar clamp brackets

Postby CapeCodCubs » Thu Mar 28, 2013 10:40 am

Never noticed they had them...click on this


http://mower-blades.agrisupply.com/search#w=82406&asug=
Image

Billy Fussell
10+ Years
10+ Years
Posts: 678
Joined: Fri Feb 16, 2007 11:28 am
Zip Code: 75959
Location: Tx., Milam

Re: planter tool bar clamp brackets

Postby Billy Fussell » Thu Mar 28, 2013 10:54 am

Thanks CCC. That is the one. I needed the smaller block. It tends to get lost from the rest. I would not hesitate to buy the block again if needed. Can't speak to the whole clamp.

Billy

User avatar
bob in CT
Team Cub Mentor
Team Cub Mentor
Posts: 6018
Joined: Thu Jun 07, 2007 9:34 am
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety: Y
Location: CT, Manchester

Re: planter tool bar clamp brackets

Postby bob in CT » Thu Mar 28, 2013 11:05 am

clodhopper wrote: the fart smone
:shock: :headbang :bellylaugh: Got to love auto complete!

CapeCodCubs
10+ Years
10+ Years
Posts: 3328
Joined: Fri Jan 11, 2008 5:30 pm
Zip Code: 02747
Tractors Owned: .
1948 F Cub Fast hitch
1949 F Cub
1950 F Cub Fast hitch
1965 Loboy Fast hitch
1966 Loboy with 1000 loader
1976 International Cub
several walk behind garden tractors
(20) FastHitch implements
tons' of cultivating and planting stuff
C-16 Cub Middlebuster
(2) A33 Cub bean harvester
NOS Planet Jr. planter
172 planter, large combo hopper, 101A fertilzer hopper
Cole 250# fertilizer hopper with chain drive.
Location: MA, Dartmouth

Re: planter tool bar clamp brackets

Postby CapeCodCubs » Thu Mar 28, 2013 11:13 am

Youre welcome Billy

Anyone purchase a fertilizer tube from Agrisupply? I just need a few things and my planter and fertilizer set up is complete!
Image

Billy Fussell
10+ Years
10+ Years
Posts: 678
Joined: Fri Feb 16, 2007 11:28 am
Zip Code: 75959
Location: Tx., Milam

Re: planter tool bar clamp brackets

Postby Billy Fussell » Thu Mar 28, 2013 11:19 am

I need a fertilizer tube myself. Mine is rotton. Is it a new product for them? I don't ever recall seeing it. Is it metal or ruber? I did buy a fertilizer deep appplicator from them. Am well satisfied with it, and it is heavy. It is made in India, but with me, function trumps origionality.

CapeCodCubs
10+ Years
10+ Years
Posts: 3328
Joined: Fri Jan 11, 2008 5:30 pm
Zip Code: 02747
Tractors Owned: .
1948 F Cub Fast hitch
1949 F Cub
1950 F Cub Fast hitch
1965 Loboy Fast hitch
1966 Loboy with 1000 loader
1976 International Cub
several walk behind garden tractors
(20) FastHitch implements
tons' of cultivating and planting stuff
C-16 Cub Middlebuster
(2) A33 Cub bean harvester
NOS Planet Jr. planter
172 planter, large combo hopper, 101A fertilzer hopper
Cole 250# fertilizer hopper with chain drive.
Location: MA, Dartmouth

Re: planter tool bar clamp brackets

Postby CapeCodCubs » Thu Mar 28, 2013 11:32 am

Did you get the fertilizer knife...I need that, a seed tube and I'll be in business.
Image

Billy Fussell
10+ Years
10+ Years
Posts: 678
Joined: Fri Feb 16, 2007 11:28 am
Zip Code: 75959
Location: Tx., Milam

Re: planter tool bar clamp brackets

Postby Billy Fussell » Thu Mar 28, 2013 3:02 pm

FERTILIZER INJECTOR KNIFE 1 1/4" SHK.

Share this product:
FERTILIZER INJECTOR KNIFE 1 1/4" SHK.
FERTILIZER INJECTOR KNIFE 1 1/4" SHK.

CCC, this is what I bought. It workd good. Looks like the real mccoy, but it is not origional.

Billy

Billy Fussell
10+ Years
10+ Years
Posts: 678
Joined: Fri Feb 16, 2007 11:28 am
Zip Code: 75959
Location: Tx., Milam

Re: planter tool bar clamp brackets

Postby Billy Fussell » Thu Mar 28, 2013 3:03 pm

Well, it didn't post llike I wanted it to, but it is a good tool.

Billy


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 18 guests