Well the weather was finally nice enough for me to pick up the backhoe portion and yes it's a D100 and yes it is heavy will have to see how everything works out when I get it on and moving. From there my 8 year old and I started to work It took us 3 hours to get the hood off - everything is rusted solid than I had to remove the air breather to get enough room to take the hood off because the welded bracket on the front out riggers that goes across the hood (note to self remove welds and make screw on brackets). With all that said we cleaned the cob webs out of the distributor filed down the points and got spark right before we got called in for dinner. Going to change the, oil prime the pump and see if she turns over tomorrow.
As always thanks for the help
Kt
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
What's this?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 82
- Joined: Fri Jun 12, 2009 8:37 pm
- Zip Code: 34601
- Tractors Owned: 1948 cub (Walli)
1957 lowboy with backhoe - Location: brooksville fl
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: What's this?
Trying to think back, it's been 20 plus years since we redid the truck. Thinking we replaced the vacuum windshield wiper motor that ran off intake manifold with perhaps an electric motor powered one from J.C. Whitney.danovercash wrote:Eugene, did his '53 Chevy truck have electric wipers?
I have an excuse. CRS.
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: What's this?
Trucks had metal arms from motor to wiper pivot point, cars had cables attached to a rotating drum.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- 10+ Years
- Posts: 18
- Joined: Sun Jun 03, 2012 3:10 pm
- Zip Code: 62640
Re: What's this?
i am in the process of changing my cub to 12 volt alternator.with the use of the ballest resister in front of the coil, can i use the original 6 volt coil and how should it be wired ? is there a wireing diogram availible in this forum ?
-
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: What's this?
Some of the cars of the day when they first changed to 12 volts used a round voltage reducer ahead of the coil to allow use of the 6 volt coil with a 12 volt system....I have one on my 57 cub....A little different scenario but as long as its being discussed, here's 2 cents worth...Auto mechanics BOCES, class of 1964...Jeeeeeez......Long time ago....Dave
In Memory of 58,286
-
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: What's this?
Oh yeah the voltage reducer...Available at NAPA...Really quite simple, two terminals goes in 12 comes out 6....I forgot the price, but it was more expensive than a resistor....Dave
In Memory of 58,286
-
- Team Cub Mentor
- Posts: 5641
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: What's this?
The ballast resister will do just fine and yes, you can use your 6v coil. No need for a diagram, just connect it in series between the power wire and the coil.
-
- 10+ Years
- Posts: 18
- Joined: Sun Jun 03, 2012 3:10 pm
- Zip Code: 62640
Re: What's this?
ah,same here,class of 64.metelergy (welding).ok,did not know there is a difference between a ballest resister and a voltage reducer.now,to wire this 12 volt alternator system (trying to see this in my head) the bettery terminal wire on the alt.will go to the negitive side,or the positive side of the amp meter ? then from that terminal to the positive post on the starter with a #10 wire.the smaller wire being R or F will go to the off side of the ignition switch and on to the ballest resister and coil.then another wire, from the alt.battery terminal wire on the amp terminal to the ignition on side terminal to give power to the coil.did i get it right ? i do not have any lights or acc.at this time.just need the cub running to plow the garden.
-
- 10+ Years
- Posts: 18
- Joined: Sun Jun 03, 2012 3:10 pm
- Zip Code: 62640
Re: What's this?
ah,same here,class of 64.metelergy (welding).ok,did not know there is a difference between a ballest resister and a voltage reducer.now,to wire this 12 volt alternator system (trying to see this in my head) the bettery terminal wire on the alt.will go to the negitive side,or the positive side of the amp meter ? then from that terminal to the positive post on the starter with a #10 wire.the smaller wire being R or F will go to the off side of the ignition switch and on to the ballest resister and coil.then another wire, from the alt.battery terminal wire on the amp terminal to the ignition on side terminal to give power to the coil.did i get it right ? i do not have any lights or acc.at this time.just need the cub running to plow the garden.
-
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: What's this?
Check out ignition/electrical in the how to section...I know Boss has a couple of articles in their complete with pictures and prices...Should answer all your questions....And see the whole scheme in pictures....Dave
In Memory of 58,286
-
- 10+ Years
- Posts: 18
- Joined: Sun Jun 03, 2012 3:10 pm
- Zip Code: 62640
Re: What's this?
hi dave,i did find that info.in the how to section very helpful.also serched for a wire diagram 12 volt cub.found one by RUDI,that now brings up another question.i will start a new post topic hoping rudi my have the answer.thank you and all who helped so much for your time and information,john
Who is online
Users browsing this forum: Glen, Majestic-12 [Bot] and 6 guests