This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Will this fit my Cub??
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
ricky racer
- 10+ Years
- Posts: 6336
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Will this fit my Cub??
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Will this fit my Cub??
Yes it will bolt right on, of course that depends on where you want to bolt it.
Or you can send your Cub to Rick Prentice and have him bolt in an International Scout 401 engine to mount it on. Then you would have an experimental Cub Scout.
Or you can send your Cub to Rick Prentice and have him bolt in an International Scout 401 engine to mount it on. Then you would have an experimental Cub Scout.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Will this fit my Cub??
Barnyard wrote:Then you would have an experimental Cub Scout.
Good one Bill
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
Bill Hudson
- Team Cub
- Posts: 9522
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: Will this fit my Cub??
Add a locator beacon with telemetric transducer and you will have the ultimate Cub Locator. 
Bill
Bill
Bill
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
Member of Ohio Chapter #6
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
Member of Ohio Chapter #6
-
Smokeycub
- 10+ Years
- Posts: 1050
- Joined: Tue Apr 26, 2011 10:47 am
- Zip Code: 44266
- Tractors Owned: 48 F Cub #11678
65 Cub Cadet 104
70 450C JD loader
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C - Circle of Safety: Y
- Location: Ravenna, Ohio
Re: Will this fit my Cub??
Barnyard wrote:Then you would have an experimental Cub Scout
Bill Hudson wrote:Add a locator beacon with telemetric transducer and you will have the ultimate Cub Locator
You guys are a hoot, made me laugh out loud!
On a semi-serious note Rick, I think that that would be one heck of a project. You seem to have no problem fab'ing things together and rather well I might add. A turbo on a Cub would probably double the power at the crank (what is the hp on a Cub at the crank? 13-15hp?) and increase the lower rpm torque. The low compression on the C60 (you'd need one with aluminum pistons) lends itself nicely to a turbo and you could still use a carburetor (richened up a bit) ala a Paxton supercharger. Hey, they run alcohol in Kolher motors, so why not? Granted the bottom end on the Kohlers are beefed up but if you keep the boost to say 5 lbs and a rev limiter(lol) if you run a distributor, it might work out pretty well. Would have to add an electric water pump though. Do you have a spare Cub? My son has a turbo charged, direct injected 2.4 - 4 banger that puts out nearly 300 hp.
Ray
Smokeycub
Attachments - 193 plow - 144 cultivator - 22 mower - 28A disc harrow - 54 leveling blade - Woods 59C2 - drag harrows - Mott D9 flail - flat belt pulley
The squeaky wheel may get the grease but it's usually the first to be replaced!
Smokeycub
Attachments - 193 plow - 144 cultivator - 22 mower - 28A disc harrow - 54 leveling blade - Woods 59C2 - drag harrows - Mott D9 flail - flat belt pulley
The squeaky wheel may get the grease but it's usually the first to be replaced!
-
Denny Clayton
- 10+ Years
- Posts: 4565
- Joined: Wed Feb 05, 2003 1:18 pm
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
- Location: OH, Sidney
Re: Will this fit my Cub??
I bet George Willer could have made it fit. Just a project he never got around to. 
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty" (CubTug winner 2007 & 2009)
Member of Ohio Chapter 6
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty" (CubTug winner 2007 & 2009)
Member of Ohio Chapter 6
-
pickerandsinger
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: Will this fit my Cub??
My brother in law designed and built props for Star Trek....He's also a red neck gear head...He has a Harley (engine only) sitting in his garage....He has a Farmall A....I once told him that engine would look good in your A or my cub....He just smiled mischievously...He mentions it on ocassion.....I'll bet you and he would get along real fine.. Dave
DaveIn Memory of 58,286
-
Jim Becker
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
pickerandsinger
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: Will this fit my Cub??
Not trying to hi jack your post Rick, but Mr Becker you've made my day... 
Dave
DaveIn Memory of 58,286
Who is online
Users browsing this forum: JNewton and 55 guests
