This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub not starting intermittently
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 207
- Joined: Mon Feb 03, 2003 9:11 am
- Location: NC
Cub not starting intermittently
My father complains sometimes his cub does nothing when he pulls the starter. The starter doesn't make any noise at all. A bit later it'll work fine. I can't reproduce it and I've never seen it do that. He seems to think I can fix it but I have no idea what is going on. Any ideas?
-
- 10+ Years
Re: Cub not starting intermittently
Yep, clean ALL the contacts and grounds from the battery to the starter. Remove starter. Remove starter switch. Clean contacts inside switch, Or, replace with a new one.
Weather, humidity, temperature and even Gremlins will cause those symptoms. Dielectric grease on all those connections would be a plus.
Weather, humidity, temperature and even Gremlins will cause those symptoms. Dielectric grease on all those connections would be a plus.
-
- 10+ Years
- Posts: 1421
- Joined: Sun Apr 30, 2006 2:54 pm
- Zip Code: 60073
- Circle of Safety: Y
- Location: IL, Round Lake Heights
Re: Cub not starting intermittently
Dale Shaw wrote:Yep, clean ALL the contacts and grounds from the battery to the starter
This includes pulling the cables off the battery posts and giving them a good scrub with a battery brush. I recently had this problem, and it turned out to be corrosion between the positive post and the cable. The tractor started fine, but stalled, and when I pulled on the starter rod, nothing. Because the failure happened so suddenly, I suspected the starter. I did check most of the connections, but the positive cable was solidly on the battery post, so I just used an Ohmmeter to check it. Even on the 20 ohm setting, it showed zero, so I figured that one was good.
Replaced the starter and the same thing happened. She started, but stalled shortly thereafter, and again nothing out of the starter. I was able to start her by running jumpers from a 12v battery to the post on the starter switch and the base of the regulater, but as soon as I disconnected the positive clamp from the tractor, she died. Loosened the positive cable clamp from the battery, and sure enough, there was a good bit of corrosion. Could have saved myself the cost of the starter.
Michael Cummings
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Re: Cub not starting intermittently
All electrical connections need to be cleaned and greased to slow down future corrosion. You can't stop it completely for it will eventually come back if you live long enough.
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 147
-
by Clemsonfor
Mon Jul 05, 2021 8:19 pm
-
- 5
- 269
-
by Bill V in Md
Fri Jan 20, 2023 3:54 pm
-
- 8
- 322
-
by ScottyD'sdad
Sun Jul 11, 2021 1:13 pm
-
- 19
- 533
-
by Waif
Tue May 18, 2021 8:25 pm
-
- 18
- 575
-
by Magnum
Wed May 05, 2021 8:56 pm
Who is online
Users browsing this forum: Glen, Majestic-12 [Bot], mattjs and 6 guests