This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hydraulic Block repair question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 339
- Joined: Wed Aug 15, 2012 8:00 am
- Zip Code: 31553
- Tractors Owned: 1966 Int'l Cub, C-2 mower 2005 Farm-Trac, 7ft Harrows and Box blade 1976 Int'l Cub, Woods 59 mower, Turn Plow, Full set of cultivators, Harrows, 174 Planter & Fertilizer unit 1953 Farmall Cub,full set of spring cultivators, wheel weights,
PTO belt pulley, snow plow and misc parts. - Circle of Safety: Y
- Location: S/E Georgia
Hydraulic Block repair question
Is there suppose to be an o-ring on the safety relief? Also, there are 3 blue o-rings in the kit I haven't found a place for...yet. Am I suppose to use any type sealant under the head gasket? Thanks for the help.
If you always do what you've always done -- you'll always get what you've always got!
- tmays
- 10+ Years
- Posts: 3414
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Hydraulic Block repair question
The three blue orings are not used. I do not use sealant on the gasket. You do not want sealant squeezing out and getting into the system.
Thomas
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Hydraulic Block repair question
Blue orings are for the hydraulic lines connection at the hydraulic pump.
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Hydraulic Block repair question
Papa's Cub wrote:Is there suppose to be an o-ring on the safety relief?
Go to the "Manuals" section on the link (above right) and open the Blue Ribbon Touch Control manual. It'll have an exploded diagram of a T/C unit with index. Each seal (o-ring) is shown and labeled.
Who is online
Users browsing this forum: No registered users and 61 guests