This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Can someone post pics of clutch shaft zerk fitting, and...
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 6
- Joined: Fri Mar 15, 2013 6:10 pm
- Zip Code: 99122
Can someone post pics of clutch shaft zerk fitting, and...
also, someone had mentioned in my post on this retrofitting a zerk on the older Cubs, if someone could post pics of where to drill, etc... I'd be much obliged. I had the pedal freed up this spring, and it started getting stiff again, spraying some really good lube in there right now with the right wheel up on a ramp to help it flow into the bushing area, but I'd like to get a permanent fix on this
- Glen
- 10+ Years
- Posts: 6138
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Can someone post pics of clutch shaft zerk fitting, and.
Hi,
Here's a picture, hope this is what you wanted.
Here's a picture, hope this is what you wanted.
- Attachments
-
- Cub.jpg (104.01 KiB) Viewed 335 times
-
- 10+ Years
- Posts: 6
- Joined: Fri Mar 15, 2013 6:10 pm
- Zip Code: 99122
-
- 10+ Years
- Posts: 5206
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Can someone post pics of clutch shaft zerk fitting, and.
I also put a fitting on the brake cross shaft on the other side as they freeze in the torque tube
Tim
Tim
-
- 10+ Years
- Posts: 6
- Joined: Fri Mar 15, 2013 6:10 pm
- Zip Code: 99122
Re: Can someone post pics of clutch shaft zerk fitting, and.
Ok, got it handled, drilled it, tapped it, greased it
I had the pedal ohhh so freed up last night by driving the tractor up on a car ramp on the right side so I could get some gravity feed through the bushing area, sprayed it over and over with this super Moly lube, Lube it all I think it's called, good stuff and the pedal worked like brand new. But since Glen posted that pic, I had no excuse no to install zerks. Went through the whole shaft on the clutch side, so grease would go all around the shaft/bushing area. Used Shell Super Duty Moly grease, it's called something different now...
And to be nice I took pics, the Cub is a 1948, we've had it in steady use since the 80's, motor was rebuilt some time back.
Thx guys
I had the pedal ohhh so freed up last night by driving the tractor up on a car ramp on the right side so I could get some gravity feed through the bushing area, sprayed it over and over with this super Moly lube, Lube it all I think it's called, good stuff and the pedal worked like brand new. But since Glen posted that pic, I had no excuse no to install zerks. Went through the whole shaft on the clutch side, so grease would go all around the shaft/bushing area. Used Shell Super Duty Moly grease, it's called something different now...
And to be nice I took pics, the Cub is a 1948, we've had it in steady use since the 80's, motor was rebuilt some time back.
Thx guys
Who is online
Users browsing this forum: No registered users and 47 guests