Can the governor shaft be removed from the governor gear assy. in a nondestructive manner. I have 2 governors: one with a bad shaft and a gear with a good area for the oil seal and one just the opposite.
Goal: One good governor.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Governor Disassembly--DONE
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Bill E Bob
- 10+ Years
- Posts: 3034
- Joined: Wed May 31, 2006 12:09 pm
- Zip Code: 74070
- Circle of Safety: Y
- Location: OK, Skiatook
Governor Disassembly--DONE
Last edited by Bill E Bob on Fri May 10, 2013 10:35 am, edited 1 time in total.
-
Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Governor Disassembly
Yes 
if you have trouble call me 434-547-5369
Boss
if you have trouble call me 434-547-5369Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
Bill E Bob
- 10+ Years
- Posts: 3034
- Joined: Wed May 31, 2006 12:09 pm
- Zip Code: 74070
- Circle of Safety: Y
- Location: OK, Skiatook
Re: Governor Disassembly
Well, the two became one. I thought WWBD (What Would Boss Do) and with a press and minor heat (propane torch) the shafts came loose (press fit). Reassembly was straightforward, however you have to watch how deep you seat the shaft or when you pin the weight carrier on there will not be enough clearance for the shaft to turn. (Don't ask how I know 
) Also a thanks to Glen for the push to get me started.
) Also a thanks to Glen for the push to get me started.-
Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Governor Disassembly--DONE
Good show Bill Now post a few pics if you have me.
Now post a few pics if you have me.Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
Bill E Bob
- 10+ Years
- Posts: 3034
- Joined: Wed May 31, 2006 12:09 pm
- Zip Code: 74070
- Circle of Safety: Y
- Location: OK, Skiatook
Re: Governor Disassembly--DONE
Rudi wrote:Good show Bill
I'll try some retroactive pics to show what I did.
-
PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Governor Disassembly--DONE
Pix, would be awesome as I have 3 governors on my bench right now.....Going to combine the best parts to make one solid one....along with some new seals of course.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
Bill E Bob
- 10+ Years
- Posts: 3034
- Joined: Wed May 31, 2006 12:09 pm
- Zip Code: 74070
- Circle of Safety: Y
- Location: OK, Skiatook
Re: Governor Disassembly--DONE
For you Rudi:
First, the shaft: Note, the shaft should be the same diameter from the left side to the shoulder.
Next, the two gear assemblies-one good-one pitted.
Removal: I used an old 3/8" deep well socket as a press collar, put some tension on the press and added heat and it popped loose.
Installation involved use of a 1/2" deep well socket as a press collar so it would fit on the shoulder of the shaft.
I didn't go into more disassembly as there is already a good powerpoint presentation on governor overhaul.
There may be some trial and error to get the proper depth of the shaft in the gear so the shaft will turn properly and not bind.
First, the shaft: Note, the shaft should be the same diameter from the left side to the shoulder.
Next, the two gear assemblies-one good-one pitted.
Removal: I used an old 3/8" deep well socket as a press collar, put some tension on the press and added heat and it popped loose.
Installation involved use of a 1/2" deep well socket as a press collar so it would fit on the shoulder of the shaft.
I didn't go into more disassembly as there is already a good powerpoint presentation on governor overhaul.
There may be some trial and error to get the proper depth of the shaft in the gear so the shaft will turn properly and not bind.
-
Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Governor Disassembly--DONE
Bill:
That is excellent, a good adjunct to Joss's demonstration back in '04. I am so glad that Carl did that up.
Pics do tell a hundred stories - these will help make it easier for those of us who are visual learners. Thanks 
That is excellent, a good adjunct to Joss's demonstration back in '04. I am so glad that Carl did that up.
Pics do tell a hundred stories - these will help make it easier for those of us who are visual learners.
Thanks Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
randallc
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: Governor Disassembly--DONE
Yea, thanks for another great show and tell.
Guinea, 1951 Farmall Cub; Jumping Willy, 1949 Farmall Cub, 61 Cub, Scrapy, and 48 Cub Al, 48 cub, Billy D.
Who is online
Users browsing this forum: No registered users and 13 guests
