This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Sickle mower pulley size
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1174
- Joined: Thu Jun 10, 2010 6:56 am
- Zip Code: 49053
- Circle of Safety: Y
- Location: Galesburg, MI
Sickle mower pulley size
Can anyone tell me the size of the pto pulley used to drive a 22 sickle mower? Also the belt length? If it can be found in the manuals point me to it, I can't find it in them. Thanks. Vern
- twotone
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: Sickle mower pulley size
I use a 4 1/2 inch pulley and a Gates B43 belt. The pulley is quite pricey.
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
- randallc
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: Sickle mower pulley size
http://www.cleancomputes.com/Cub/Cub%20Implement%20Manuals/Cub-22%20Mower%202-5-52/Cub-22%20Mower%202-5-52.htm Is a manual, the pulley : a 4 inch or 4 1/2 in. the belt, I'll have to look it up or someone else will answer.
-
- 10+ Years
Re: Sickle mower pulley size
v w wrote:Can anyone tell me the size of the pto pulley used to drive a 22 sickle mower? Also the belt length? If it can be found in the manuals point me to it, I can't find it in them. Thanks. Vern
Assuming you have the Cub-22 mower version and not one for a loboy, like Randall said, there were two pulley and belt sizes made over the years:
1947-1955 years:
4 1/2" dia. pulley - IH part #451356R2
belt - IH part #452197R1
1955 + years:
4" dia. pulley - IH part #457291R1
belt - IH part #457292R1
When looking for pulleys, don't confuse a 4" dia loboy pulley with a 4" cub pulley, the loboy version is made thinner.
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
- Bus Driver
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Re: Sickle mower pulley size
Here is an earlier project and post in which I participated.
viewtopic.php?f=149&t=33942
The pulley works well.
viewtopic.php?f=149&t=33942
The pulley works well.
Luck favors those who are prepared
Who is online
Users browsing this forum: No registered users and 61 guests