Stan, that sounds like a good idea, I'd be interested in seeing how this is done in case I ever happen across something like this. I'd rather know how now than break something later.
Thanks!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Barnyard Bash Projects & Demos
Forum rules
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.
IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.
IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
- Barnyard
- Team Cub
- Posts: 24240
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Barnyard Bash Projects & Demos
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
- sdurnal
- 10+ Years
- Posts: 923
- Joined: Thu May 06, 2010 1:36 pm
- Zip Code: 47201
- Tractors Owned: 105 & 127 cadet (sacrificed for a 4wd project)
680 Cadet
1964 LoBoy FH
L-54A Blade
Pennington 3 spindle deck
LF-194 plow - Circle of Safety: Y
- Location: IN, Columbus
Re: Barnyard Bash Projects & Demos
The "training aids" are prepped. hehe I have a shaft, pulley, one fitted key and 2 blanks to play with.. (as well as the extractors) I'll only need a vice and maybe a c-clamp to demonstrate. (After working with this means of fastening for 30 years, I have many stories) Looking forward to it!
Regards, Stan
Regards, Stan
- Hengy
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
- Contact:
Re: Barnyard Bash Projects & Demos
I have a tire that currently sits on a really badly rusted rim that I need help dismounting. I had talked with Yogie about heading down to West Virginia for a tire-removing micro fest, but if I could get some help at the bash, I will gladly wrap it up and toss it in the back of the Camry. After removing the tire, if someone wants a fire ring, you are welcome to that!
Can we put that on the list?
Thanks!
Mike
Can we put that on the list?
Thanks!
Mike
- Barnyard
- Team Cub
- Posts: 24240
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Barnyard Bash Projects & Demos
sdurnal wrote:I'll only need a vice and maybe a c-clamp to demonstrate.
Stan, I have a vise and several sizes of "C" clamps. We should be good to go.
Hengy wrote:I have a tire that currently sits on a really badly rusted rim that I need help dismounting... ...if I could get some help at the bash, I will gladly wrap it up and toss it in the back of the Camry.
Mike, bring that tire along. I picked up an Esco 70160 bead breaker. It works pretty good on rear tires with little effort.
We'll give it a try on your rim.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
Return to “CubFest and Tractor Show Announcements & Discussions”
Who is online
Users browsing this forum: No registered users and 8 guests