Had a good day mowing today and right new the end, I heard a strange metalic sound. After shutting off the Cub, I saw a chunk of metal laying on the mower deck. Upon inspection, I found it to be a piece of the pan pully, the front one which carries the belt from crank to fan. So, checking Ebay I see someone is selling complete fan/pulley,bolt assemblies for 75 bucks. These are new and fitted with sealed bearings.
So, had anyone had and experience with these units with the sealed bearings? And would anyone happen to have the belt number cross reference for NAPA as it got a bit chewed up. Brother, it always seams to be one thing or the other.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Fan pulley woes..
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Dale Finch
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Fan pulley woes..
Where are you located? If you are interested, I have a fan assembly off a '55 cub that was parted out. $40 + shipping or can bring it to Boss' VA Fest this weekend.
-
- 10+ Years
- Posts: 1224
- Joined: Wed Jul 02, 2008 6:11 am
- Location: MN, Mankato
Re: Fan pulley woes..
I don't know anything about the sealed ones, but when I changed mine for a similar problem I remember reading other posters noting caution when removing and replacing the rear-most nut, not to break the mounting post.
Todd
Todd
-
- 10+ Years
Re: Fan pulley woes..
IH fan belt part # is 251428R1
Your NAPA store should be able to cross reference that.
Your NAPA store should be able to cross reference that.
-
- 10+ Years
- Posts: 804
- Joined: Tue Apr 17, 2012 7:55 pm
- Zip Code: 47119
- Skype Name: ntrenn
- Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
193 Plow
42C mower
59L mower mounted on the Fcub
23A Disc - lost possession - Circle of Safety: Y
- Location: Indiana
Re: Fan pulley woes..
The belts I used were 3310 for the fan and 2230 for the generator. They are about $10 at local stores and about $15 at your dealer.
-
- 10+ Years
- Posts: 185
- Joined: Thu Jul 08, 2004 6:00 pm
Re: Fan pulley woes..
Thanks 47 for the number. And Dale, thanks but I had already went a head and ordered one. Got a lot of grass to cut and needed it asap/ Thanks
Who is online
Users browsing this forum: No registered users and 69 guests