This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Dent in Oil Pan!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
Dent in Oil Pan!
At some point over the years - An implement came under the front corner of the oil pan - effectively turning the outside radius to the inside.
I'm thinking of heating it and using my bigger ball-peen <sp> hammer to do my best at rounding it out.
Is there a better approach or tool for correcting this issue?
Ken
I'm thinking of heating it and using my bigger ball-peen <sp> hammer to do my best at rounding it out.
Is there a better approach or tool for correcting this issue?
Ken
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Dent in Oil Pan!
Not knowing how big the dent, oil pans are very cheap. Might be better and easier to just buy an experienced oil pan.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 523
- Joined: Fri Feb 11, 2011 6:06 pm
- Zip Code: 62995
- Tractors Owned: 1951 Farmall Cub
1950 John Deere A
1949 Farmall Cub
1943 Farmall H
1940 Farmall H
1953 Farmall Super M
1962 Massey Ferguson 65 - Circle of Safety: Y
- Location: Southern Illinois
Re: Dent in Oil Pan!
I use a block of wood and a hammer or a dead blow hammer to straighten out dents in stuff like oil pans, mower decks and sheet metal. Just a ball peen hammer leaves to many little dents.
Rodney
Rodney
USAF 1976 - 1996
-
- 10+ Years
- Posts: 6338
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Dent in Oil Pan!
Eugene wrote:Not knowing how big the dent, oil pans are very cheap. Might be better and easier to just buy an experienced oil pan.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
- 10+ Years
- Posts: 192
- Joined: Tue May 24, 2011 12:26 pm
- Zip Code: 29325
- Skype Name: JRICK
- Tractors Owned: 1940 Allis Chalmers WC
1949 Farmall Cub "Haydee Bug"
1960 Massey Ferguson Diesel Deluxe
1950 Allis Chalmers "B"
1980 Power King Model 1616
1991 400A Belarus
1952 Massey Harris Pony - Circle of Safety: Y
Re: Dent in Oil Pan!
Experienced Oil Pan...Now that' funny right there! I'll be using that one,LOL.
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Dent in Oil Pan!
Yep on the replacement... No matter what you do it will 'look' repaired. Some things I just leave alone, depending on how bad it is. I figure every dent has a story..... all I can do is guess what the story is.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Dent in Oil Pan!
Yes, that's the P/C term, just like "transfer station" for the dump and "Ethnic Engeering" for well, you know.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
Re: Dent in Oil Pan!
ricky racer wrote:Eugene wrote:Not knowing how big the dent, oil pans are very cheap. Might be better and easier to just buy an experienced oil pan.
A 1" Maple Dowel - seems to fit it pretty well.
- Attachments
-
- Outside View
- IMG_2224 (768x1024).jpg (315.15 KiB) Viewed 633 times
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Dent in Oil Pan!
Cultivator dent. First time you adjust the depth, you'll probably put it back in.
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Dent in Oil Pan!
Probably cause a leak trying to fix that!
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
Re: Dent in Oil Pan!
I was going to use my brazing tip, a maple dowel, wrapped in glass cloth and a sandbag protected with glass cloth. Do you think it will leak if it's heated and rebent like this?
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- Team Cub
- Posts: 9526
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: Dent in Oil Pan!
PVF1799 wrote:I was going to use my brazing tip, a maple dowel, wrapped in glass cloth and a sandbag protected with glass cloth. Do you think it will leak if it's heated and rebent like this?
Ken,
It is worth a shot. If it leaks, there are "experienced" pans available.
Bill
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Dent in Oil Pan!
If it leaks braze it.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 2729
- Joined: Sun Oct 03, 2004 7:11 am
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub - Circle of Safety: Y
- Location: NH, Kingston
Re: Dent in Oil Pan!
i had to straighten all 3 of mine, that looks like it will straighten out ok. i would be surprised if you had a problem with it leaking because of the thickness of the metal. not sure but i think its 16 gauge metal.
-
- 10+ Years
- Posts: 6338
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Dent in Oil Pan!
That metal has done a lot of sterching. If I were bent on saving that pan, I'd be more inclined to cut out the damaged area, form a new piece and weld it in. I think you'd spend less time and have more luck doing that.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
Who is online
Users browsing this forum: CaperKen, ericofmaine, ghanlin and 1 guest