![Very Happy :D](./images/smilies/icon_biggrin.gif)
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 Project (photo heavy!!)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- twotone
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: 154 Project (photo heavy!!)
there's only about 1/2 thread left on the shaft. ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: 154 Project (photo heavy!!)
I've been working on the Loboy still, but not finished...
I had an issue with the front headlight retainer with rusted and broken studs. Thought about throwing it away and getting another from Hamilton Bob, but took a stab at a repair first. I didn't take and before pics, but these are the results:
I took my Dremel and cut the broken stud from the plate flush with the risers (red arrow). Then a center punch and drilled all the way through the plate. Tapped to 10-24. Picked up a piece of all thread from Lowes and cut it into four equal pieces and JB welded it in place with jam nuts to add reinforcement and keep things tight.
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/IMG_2117.jpg)
With the JB weld in the threads and a bit on the end of the all thread, I ended up with a bit protruding from the front side.
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/IMG_2118.jpg)
Sanded it down smooth with the front. There is a decal that covers the entire front light housing, so perfection wasn't key.
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/IMG_2119.jpg)
This is what I ended up with. The threads are still a bit long, but nothing a Dremel can't fix. All total, I've got about $2 in the parts and about 30 minutes of time. Picked up new wing nuts as well for the light retainers. Just waiting on my yellow paint!!
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/IMG_2120.jpg)
![Sad :(](./images/smilies/icon_sad.gif)
I had an issue with the front headlight retainer with rusted and broken studs. Thought about throwing it away and getting another from Hamilton Bob, but took a stab at a repair first. I didn't take and before pics, but these are the results:
I took my Dremel and cut the broken stud from the plate flush with the risers (red arrow). Then a center punch and drilled all the way through the plate. Tapped to 10-24. Picked up a piece of all thread from Lowes and cut it into four equal pieces and JB welded it in place with jam nuts to add reinforcement and keep things tight.
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/IMG_2117.jpg)
With the JB weld in the threads and a bit on the end of the all thread, I ended up with a bit protruding from the front side.
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/IMG_2118.jpg)
Sanded it down smooth with the front. There is a decal that covers the entire front light housing, so perfection wasn't key.
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/IMG_2119.jpg)
This is what I ended up with. The threads are still a bit long, but nothing a Dremel can't fix. All total, I've got about $2 in the parts and about 30 minutes of time. Picked up new wing nuts as well for the light retainers. Just waiting on my yellow paint!!
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/IMG_2120.jpg)
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
- phildidit
- 10+ Years
- Posts: 1629
- Joined: Mon Jan 29, 2007 7:09 pm
- Zip Code: 30114
- Tractors Owned: 1951 cub "Ms. Scarlett"
1962 Leora's loboy "Starburst" - Circle of Safety: Y
- Location: GA, Canton/Waleska
Re: 154 Project (photo heavy!!)
can't wait to see her done Raymond. Looks like she's coming along good.
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: 154 Project (photo heavy!!)
Nice elegant fix Raymond ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- Tezell
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
- Contact:
Re: 154 Project (photo heavy!!)
Looking good Raymond.
Looking foward to seeing the finished pictures.
Looking foward to seeing the finished pictures.
"I ain't believing this!"
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: 154 Project (photo heavy!!)
A bit of a preview...
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/3AF38FB2-7EFE-4E1C-B1C6-2C7FC232609C-6561-00000AD547F8BD11.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/67DCBE07-436D-4A92-BD59-84E314AF8B7D-6561-00000AD54D0A63C7.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/3AF38FB2-7EFE-4E1C-B1C6-2C7FC232609C-6561-00000AD547F8BD11.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/67DCBE07-436D-4A92-BD59-84E314AF8B7D-6561-00000AD54D0A63C7.jpg)
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: 154 Project (photo heavy!!)
Looking good so far. Great job.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: 154 Project (photo heavy!!)
Well, I blew my original timeline just a bit...
I'm back on track now, just waiting on a couple of things to wrap this up!!
Got the engine running, great oil pressure, no strange noises, so I should be good to go on that end. I'm a little further along than the photos show, but still a ways from being finished!!
Ordering decals and dash plate tomorrow from C&G, just wish they offered the correct one for this SN 154, but I guess beggars can't be choosers.
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/null_zps1a5aa22c.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/null_zps77b5a59e.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/22f8eb52e8863c3935194e6dc83625c4_zpsa87fd811.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/d6871e2a15364ee0897e2ea2fcf7df1b_zps752ba6c2.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/null_zps55880a91.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/null_zpsb64b3637.jpg)
Special thanks to HamiltonBob, everything I've ordered from him and his crew (and I've ordered a lot!! ) has been top notch!!
![Shocked :shock:](./images/smilies/icon_eek.gif)
Got the engine running, great oil pressure, no strange noises, so I should be good to go on that end. I'm a little further along than the photos show, but still a ways from being finished!!
Ordering decals and dash plate tomorrow from C&G, just wish they offered the correct one for this SN 154, but I guess beggars can't be choosers.
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/null_zps1a5aa22c.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/null_zps77b5a59e.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/22f8eb52e8863c3935194e6dc83625c4_zpsa87fd811.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/d6871e2a15364ee0897e2ea2fcf7df1b_zps752ba6c2.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/null_zps55880a91.jpg)
![Image](http://i1195.photobucket.com/albums/aa400/RDurban/154%20Rebuild/null_zpsb64b3637.jpg)
Special thanks to HamiltonBob, everything I've ordered from him and his crew (and I've ordered a lot!! ) has been top notch!!
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
- twotone
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: 154 Project (photo heavy!!)
Looks great Raymond. I was wondering how you were coming along with your 154.
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
- randallc
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: 154 Project (photo heavy!!)
Raymond, you got it going on. Everything looks super clean and ready to go back together. Good thing you got a good memory. Great work.
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: 154 Project (photo heavy!!)
randallc wrote:Raymond, you got it going on. Everything looks super clean and ready to go back together. Good thing you got a good memory. Great work.
Randall, I've got Bob here to keep me straight and remind me where all these parts go!
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Thanks fellas!
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 10
- Joined: Thu Aug 22, 2013 8:57 pm
- Zip Code: 21015
Re: 154 Project (photo heavy!!)
You probobly said this somewhere but what paint are you using?
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: 154 Project (photo heavy!!)
I'm using CaseIH Iron Guard in spray cans, Federal Yellow and 935 White.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 2729
- Joined: Sun Oct 03, 2004 7:11 am
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub - Circle of Safety: Y
- Location: NH, Kingston
- Contact:
-
- 10+ Years
- Posts: 12
- Joined: Mon Aug 19, 2013 10:11 pm
- Zip Code: 44024
- Tractors Owned: 1952 Farmall Super A
1975 loboy 185 - Location: Cleveland Ohio
Re: 154 Project (photo heavy!!)
Hello, Very nice work...enjoyed the pictures. I am just starting a 185 rebuild myself. Close to getting the block out...already pulled the number 3 piston because of a visible score mark. My engine sat for 30 years unused. There was an enourmous amount of carbon in the combustion chambers, valves, manifold, etc. Is this common...I also have the Zenith carb #13781 that says bendix on the front. My Muffler is also stuck in the manifold....thanks for the tip on getting it out. Now for the big question. Do you have a source for an origional style muffler to replace the one you just cut off? I would really like to replace mine also but can't find one anywhere.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 11 guests