i mowed about an acre lot. it was a nasty overgrown mess. 2-3 foot overgrown weeds. the property belongs to a friend of mine that inhereted it from another close friend that had no next of kin. anyways i was really pleased with the way my tractor handled that mess with a 60" mower. seems like there is allot of talk here about the C60 not having enough power to effectively handle a 60" deck when mowing in real bad conditions. sometimes i found myself taking half passes where the stuff was really thick and overgrown but it still handled it fairly well. now if i was mowing that stuff while going up hill it might have been a different story. i do realize why IH did add more power to the cubs later in production. while it will most anything on level ground when the conditions are really bad you have to take your time. when it was over, the acre+ field was turned into a lawn in about an hour, and when you consider what a pain that would have been with any other machine except for a larger farm tractor or perhaps a $20,000 kubota tractor, you really cant complain. i also think the belly mower concept is superior to the pull behind mowers in several ways. you arent driving over the grass before its mowed and you can see both ends of the mower from the seat without looking behind. the old cub is great little workhorse and i hope to have her for a very, very long time. when the day does eventually come for a rebuild i think i would try to get a few extra ponies out of it, maybe go with a zenith caburator and the better pistons.
my cub also plays well with other IH tractors, lol. my friend has a IH/farmall 766 with a bucket. he was using his tractor to clean up some debris while i tackled the mowing with the cub. i got a chance to run the 766 and my friend got on my cub. the 766 wow what a powerhouse, but way to big of a tractor to be mowing with. he doesn't own a cub but he loves cubs and was partially the reason why i bought the cub, he told me how great the perfom mowing. i thought the cub would have been too large to mow a mid sized lawn (2 acres). i think that for a 2 acre lawn that doesnt have an exessive amount of trees and tight quarters they simple cannot be beat, they are among the best. i think the only other tractor i would ever consider would be a super-A, but i think the cub might be more manageable mowing a residental lawn.
one thing is without a doubt.... IH really knew how to build a great tractor from the sub-compact sized cub all the way up to the big farm tractors... they are among the best tractor anyone has ever produced.
i always wondered why case/IH never built a modernized cub in the farmall line that they now produce.... eh they would probably ruin it anyways.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
worked the cub hard today
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 296
- Joined: Sat Sep 08, 2012 10:14 pm
- Zip Code: 14113
-
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: worked the cub hard today
On the occasion when I have to mow in high weeds etc , I some times raise the mower to a higher position and run thru it a couple of inches or whatever higher than normal, then make another pass with the mower lowered....I have two mowers on two different cubs....A 59 inch Danco and a 42 inch IH....I like them both and have no power issues although I do mow on "flat" acreage...Agreed, the cub is a great machine....I bought my wife a Craftsman 26 HP lawn tractor(hydro-static) for her buzzing around and there's no comparison...The cub is more comfortable, uses less gas, is far more versatile and I don't feel like the old Monkey and the football when I'm working the cub...( 6 foot 4 ).....Have a great day....Dave
In Memory of 58,286
-
- 10+ Years
- Posts: 1655
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
Re: worked the cub hard today
both of y'all hit the nail on the head . i mow 1 1/2 acre at the house , and another 1 1/2 at the shop with my loboy ( sorry boss , i have one and love it ) . the properties are flat with random trees and landscaping , but the cub just knocks it out . it took about an hour + to cut with my craftsman 20 hp , the cub takes 20/25 minutes (60" deck) . coppersmythe............ps: my neighbor has a zero turn , i want to test the time with it and see how the cub fairs.
-
- 10+ Years
- Posts: 1224
- Joined: Wed Jul 02, 2008 6:11 am
- Location: MN, Mankato
Re: worked the cub hard today
Case IH small compact tractors are called Farmalls.
Todd
Todd
-
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
Re: worked the cub hard today
I LOVE my Woods 59 (thanks Bill Hudson). I cut my 0.5 acre lawn with my cub and mower, and the result looks like a golf course! (sharp blades help!) I have learned my yard, though, and I know where the mower will bottom out when I mow and have to adjust the height a bit here and there. I can't wait until I move up to Hengelsberg Hill and get to mow the field with Merlin... more fun times!!
Mike
Mike
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: worked the cub hard today
You can use a calculator to compare mowers.
http://www.landscapecalculator.com/calculators/mow
A 184 mowing in second gear (3.8MPH) with a 60" deck can mow about 2.07 acres per hour if mowing wide open space with a 10% overlap.
Your results will vary due to obstructions and familiarity with the equipment.
http://www.landscapecalculator.com/calculators/mow
A 184 mowing in second gear (3.8MPH) with a 60" deck can mow about 2.07 acres per hour if mowing wide open space with a 10% overlap.
Your results will vary due to obstructions and familiarity with the equipment.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 296
- Joined: Sat Sep 08, 2012 10:14 pm
- Zip Code: 14113
Re: worked the cub hard today
i have a neighbor that likes to "butt-heads" with me. he told me how long he has had his POS a stamped piece of garbage newer MTD cub cadet, probably 5 years old. i told him he is lucky if that thing lasts him 3-400 hours. he told me he think i used a "ridiculous tractor" and that he would never use a farm tractor to mow his lawn. what he fails to realize is that one of the best uses for a cub is mowing. they have seen service mowing on farms, by highway departments, and even in parks and golf courses. they are superior to every other lawnmower/lawn tractor except for maybe the really high end commerical stuff that costs ALLOT more then any cub. you could run a cub for a lifetime and never come close to the cost of one of those high end units (ferris, kubota). someone tells me they would rather mow with one of these plastic mowers i just laugh. once you go to a real farm tractor with a belly mower you will never go back to lawn and garden tractors. i had 'em myself, i had a john deere 112 and still have a cub cadet 147. you guys are right cubs have more power, are more vertisle, burn less fuel and are more comfortable. i never thought it was possible that a 4 cylinder engine would burn less gas then the single cylinder kohler k series that i was used to.... somehow they do, i am not sure myself why that is but a cub is far more economical on gas then a single lung engine.
is it that a cub engine spins at 1,600-1,800 rpm at full throttle and that single cylinder engine runs at 3,600. IH knew exactly what they were doing when they designed and built the C60. make a small 4 cylinder engine that wont run hot, wont burn allot of gas, and has great lugging ability. they did this with a very simple flathead design and technology that is almost 60 years old. WOW. all of this new tech you can have it, i dont want or need it. the only thing that beats it is a desiel and they are allot of money.
is it that a cub engine spins at 1,600-1,800 rpm at full throttle and that single cylinder engine runs at 3,600. IH knew exactly what they were doing when they designed and built the C60. make a small 4 cylinder engine that wont run hot, wont burn allot of gas, and has great lugging ability. they did this with a very simple flathead design and technology that is almost 60 years old. WOW. all of this new tech you can have it, i dont want or need it. the only thing that beats it is a desiel and they are allot of money.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: worked the cub hard today
Interesting calculator. Shows I can mow 1.53 acres an hour with my L-111. Be nice when I get my C-2 finished.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 296
- Joined: Sat Sep 08, 2012 10:14 pm
- Zip Code: 14113
Re: worked the cub hard today
then my neighbor give me a laugh when i tells me that his friend that keeps buying MTD white and keeps replacing them. he tries to tell that his MTD cub cadet is somehow better then MTD white. they are the SAME poorly made machine. stampted steel and plastic junk made by the same exact company using many of the same cheap parts. mostly difference in paint color. my neighbor does not have a slightly older 3000 series cub cadet either, he just has an $1,800 lawn tractor.so yes the white and his machine are almost exactly the same
-
- 10+ Years
- Posts: 1050
- Joined: Tue Apr 26, 2011 10:47 am
- Zip Code: 44266
- Tractors Owned: 48 F Cub #11678
65 Cub Cadet 104
70 450C JD loader
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C - Circle of Safety: Y
- Location: Ravenna, Ohio
Re: worked the cub hard today
It's nice to see all the glowing "reviews" on these great ol' Cubs. I've been touting them since I bought mine about 7 or 8 years ago (I wanted one since I was a kid). As I have said before on this forum, they are almost eloquent in their simplicity and great design. From plowing a field to mowing the lawn and all in between, they are excellent at what they are designed to do. A friend of mine has a Kubota B7200, (hydrostatic,17 hp diesel, 4wd, locking differential, 60" deck, 3 point, 540 pto, and of course hydraulics) it works great and built like a tank, but he never really liked it. He found a 184 Low Boy with a Woods 59 deck and a 3 point. He had to have it. He has seen me mow and do so much with mine (49 F Cub) I think he subliminally felt he had to have one. They are, as mentioned before, easy on gas, and even for the prices they bring today are still a bargain compared to anything new. If you're handy at all they will continue to work and put a smile on our face for many more years to come.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 9
- 548
-
by MeAndTK
Tue Nov 30, 2021 8:33 pm
-
-
How hard do you run your cub? Attachment(s)
by Shadow_storm56 » Thu Jul 08, 2021 9:03 pm » in Farmall Cub - 33
- 1021
-
by Dirtdoc74
Wed Jul 14, 2021 6:25 pm
-
-
- 8
- 322
-
by ScottyD'sdad
Sun Jul 11, 2021 1:13 pm
-
- 3
- 265
-
by inairam
Mon May 23, 2022 5:58 am
-
- 13
- 694
-
by Eugene
Fri Sep 08, 2023 7:59 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 11 guests