When the clutch is reinstalled onto the flywheel is there a specific tension of the springs, or is the tension simply set when the clutch and flywheel are tight together?
I will need to reinstall the fingers onto the clutch plate. Can I just hold the pieces together with C-clamps (compressing the springs) when I put the pivot pin for the fingers back in, or is the tension more precise?
I hope my question is clear.
Todd
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
clutch spring tension
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
TJG
- 10+ Years
- Posts: 1224
- Joined: Wed Jul 02, 2008 6:11 am
- Location: MN, Mankato
-
Eugene
- Team Cub Mentor
- Posts: 20367
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: clutch spring tension
If it's only the finger spring you may not need any devices to compress the spring.
Never had a pressure plate apart, so don't really know the answer. Suggest looking at the service manual.
Pressure plate springs are tested be for installation in to the pressure plate.
Never had a pressure plate apart, so don't really know the answer. Suggest looking at the service manual.
Pressure plate springs are tested be for installation in to the pressure plate.
I have an excuse. CRS.
-
Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: clutch spring tension
Todd:
Reading the GSS-1411 Service Manual for Cubs and Lo-boy Tractors Revision 1 - Section 5 - Engine Clutch
Tension:
Specifications:
Reading the GSS-1411 Service Manual for Cubs and Lo-boy Tractors Revision 1 - Section 5 - Engine Clutch
Tension:
Specifications:
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Who is online
Users browsing this forum: Bill V in Md, Steve Butram and 21 guests
