This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
belt problem on c-2 mower
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 40
- Joined: Mon Jun 10, 2013 9:09 pm
- Zip Code: 98095
- Tractors Owned: 2 economy tractors
1 windolph crawler
1 mightyman walk behind
1 home built backhoe
1 1965 cub lowboy
belt problem on c-2 mower
I have tractor running again but have not added fenders or hood yet. Mower is working well but the belt gets twisted on pulleys. The idler pulleys are wider than the others so I think they were replaced with wrong size. In picture you can see belt rides at very bottom of idler pulleys. Can anybody confirm this?.
I wanted to post pics of the backhoe I built. When moving it for pics a small part on spool valve broke so its stuck here till part arrives
I wanted to post pics of the backhoe I built. When moving it for pics a small part on spool valve broke so its stuck here till part arrives
- Attachments
-
- drive shaft 010.jpg (435.08 KiB) Viewed 344 times
-
- drive shaft 008.jpg (459.15 KiB) Viewed 344 times
-
- drive shaft 007.jpg (474.98 KiB) Viewed 344 times
-
- drive shaft 002.jpg (462.91 KiB) Viewed 344 times
-
- drive shaft 001.jpg (469.44 KiB) Viewed 344 times
-
- 10+ Years
- Posts: 40
- Joined: Mon Jun 10, 2013 9:09 pm
- Zip Code: 98095
- Tractors Owned: 2 economy tractors
1 windolph crawler
1 mightyman walk behind
1 home built backhoe
1 1965 cub lowboy
Re: belt problem on c-2 mower
pic of pulley
- Attachments
-
- drive shaft 003.jpg (460.8 KiB) Viewed 342 times
-
- 10+ Years
- Posts: 40
- Joined: Mon Jun 10, 2013 9:09 pm
- Zip Code: 98095
- Tractors Owned: 2 economy tractors
1 windolph crawler
1 mightyman walk behind
1 home built backhoe
1 1965 cub lowboy
Re: belt problem on c-2 mower
I will post more pics in non cub forum of other tractors
-
- 10+ Years
- Posts: 5199
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: belt problem on c-2 mower
looks like the right idler is bent in compared to the left
tim
tim
-
- 10+ Years
- Posts: 40
- Joined: Mon Jun 10, 2013 9:09 pm
- Zip Code: 98095
- Tractors Owned: 2 economy tractors
1 windolph crawler
1 mightyman walk behind
1 home built backhoe
1 1965 cub lowboy
Re: belt problem on c-2 mower
no it's not bent, just my bad angle with camera, I was trying to show how deep belt is inside idler and v
grove is wider on idler. just seems all pulleys should be the same size v grove
grove is wider on idler. just seems all pulleys should be the same size v grove
- t jackson
- 10+ Years
- Posts: 920
- Joined: Wed Feb 01, 2006 9:36 pm
- Zip Code: 21157
- Circle of Safety: Y
- Location: MD, Westminster
- Contact:
Re: belt problem on c-2 mower
maybe wrong size belt?
-
- 10+ Years
- Posts: 40
- Joined: Mon Jun 10, 2013 9:09 pm
- Zip Code: 98095
- Tractors Owned: 2 economy tractors
1 windolph crawler
1 mightyman walk behind
1 home built backhoe
1 1965 cub lowboy
Re: belt problem on c-2 mower
could be, fits pulleys on spindle and jackshaft 5/8 across belt. not sure what original was
- t jackson
- 10+ Years
- Posts: 920
- Joined: Wed Feb 01, 2006 9:36 pm
- Zip Code: 21157
- Circle of Safety: Y
- Location: MD, Westminster
- Contact:
Re: belt problem on c-2 mower
474 099 R1 is the ih part no.
-
- Team Cub Mentor
- Posts: 20367
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: belt problem on c-2 mower
Hard to tell. Looks like the flat side (outs side) of the belt is in the wrong location on the the idler pulleys. Veed portion of the belt should be in the pulley groves. The belt in front of the right idler pulley, appears to be flat side up, or upside down.
Also appears that the belt is not wide enough for the pulley and idlers.
Also appears that the belt is not wide enough for the pulley and idlers.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 40
- Joined: Mon Jun 10, 2013 9:09 pm
- Zip Code: 98095
- Tractors Owned: 2 economy tractors
1 windolph crawler
1 mightyman walk behind
1 home built backhoe
1 1965 cub lowboy
Re: belt problem on c-2 mower
you are correct Eugene, the belt keeps rolling. may have wrong belt , looks like it does not have deep enough v to keep it straight. belt is correct on idler but on edge on jackshaft and spindle pulleys
Thank You Jackson
Thank You Jackson
- t jackson
- 10+ Years
- Posts: 920
- Joined: Wed Feb 01, 2006 9:36 pm
- Zip Code: 21157
- Circle of Safety: Y
- Location: MD, Westminster
- Contact:
Re: belt problem on c-2 mower
it would be a gates belt B67 outside length 70 inches top width .66 inch or 21/32 inch
-
- 10+ Years
- Posts: 40
- Joined: Mon Jun 10, 2013 9:09 pm
- Zip Code: 98095
- Tractors Owned: 2 economy tractors
1 windolph crawler
1 mightyman walk behind
1 home built backhoe
1 1965 cub lowboy
Re: belt problem on c-2 mower
The belt I have is to short (not helping)
may have wrong idler pulleys per buzzards posting here (half way down the page)
viewtopic.php?f=1&t=74051&p=594930&hilit=danco+c2+mower#p594930
my pulley measures 7 3/8" O.D.
and the profile of my belt is wrong.
anybody know diamater of original pulley?
may have wrong idler pulleys per buzzards posting here (half way down the page)
viewtopic.php?f=1&t=74051&p=594930&hilit=danco+c2+mower#p594930
my pulley measures 7 3/8" O.D.
and the profile of my belt is wrong.
anybody know diamater of original pulley?
-
- 10+ Years
- Posts: 40
- Joined: Mon Jun 10, 2013 9:09 pm
- Zip Code: 98095
- Tractors Owned: 2 economy tractors
1 windolph crawler
1 mightyman walk behind
1 home built backhoe
1 1965 cub lowboy
Re: belt problem on c-2 mower
thank you jackson, that a big help.
-
- 10+ Years
- Posts: 40
- Joined: Mon Jun 10, 2013 9:09 pm
- Zip Code: 98095
- Tractors Owned: 2 economy tractors
1 windolph crawler
1 mightyman walk behind
1 home built backhoe
1 1965 cub lowboy
Re: belt problem on c-2 mower
guess it's high time I learn more about belt size and how the # corralates
- t jackson
- 10+ Years
- Posts: 920
- Joined: Wed Feb 01, 2006 9:36 pm
- Zip Code: 21157
- Circle of Safety: Y
- Location: MD, Westminster
- Contact:
Re: belt problem on c-2 mower
i have one of those mowers i will measure my pulleys tomorrow they look right though
Who is online
Users browsing this forum: No registered users and 16 guests