Anyone here know of a source (or suitable substitute) for the friction disc (IH Part No. 350 912 R 1) that fits between the control lever and the control lever bracket? Mine is long since missing, and the control lever won't stay put in mid-range. This is not normally a problem, as I only run a CUB-22 mower and it is usually either fully raised or lowered, but I would like for the control to work more like it is supposed to than it does now.
Jim
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Touch Control Friction Disc
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 23
- Joined: Fri Jul 05, 2013 12:13 pm
- Zip Code: 38862
- Tractors Owned: :
1945 Farmall A
1947 Farmall A
1949 Farmall Cub
1950 John Deere M - Location: Plantersville, MS
Touch Control Friction Disc
1945 Farmall A
1947 Farmall A
1949 Farmall Cub
1950 John Deere M
1947 Farmall A
1949 Farmall Cub
1950 John Deere M
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Touch Control Friction Disc
if it is the one with the adjustable friction, it is still available form Case IH, but if it is the one you cannot adjust the friction on, you will have to look around. I found a disk at a lawnmower repair shop for the lever disk on a hydrostat that worked out pretty good, unfortunately it has been so long ago I do not remember what mower, or even brand it was for.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 23
- Joined: Fri Jul 05, 2013 12:13 pm
- Zip Code: 38862
- Tractors Owned: :
1945 Farmall A
1947 Farmall A
1949 Farmall Cub
1950 John Deere M - Location: Plantersville, MS
Re: Touch Control Friction Disc
Yes, unfortunately mine is the older non-adjustable. Will check around the local lawnmower shops and see what I can turn up.
Thanks, that's more than I had to go on.
Jim
Thanks, that's more than I had to go on.
Jim
1945 Farmall A
1947 Farmall A
1949 Farmall Cub
1950 John Deere M
1947 Farmall A
1949 Farmall Cub
1950 John Deere M
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Touch Control Friction Disc
forgot to mention, the one I found was a smaller diameter, but it worked.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4
- 269
-
by Bill V in Md
Thu Feb 10, 2022 9:55 pm
-
- 5
- 1065
-
by Glen
Thu Dec 28, 2023 6:35 pm
-
-
Should this be used with touch control Attachment(s)
by cowridermi » Sun May 14, 2023 2:41 pm » in Farmall Cub - 2
- 234
-
by radioguy41
Sun May 14, 2023 5:07 pm
-
-
- 0
- 85
-
by Tristan55555
Thu Apr 11, 2024 1:07 pm
-
- 5
- 357
-
by Don McCombs
Wed Jan 19, 2022 7:58 am
Who is online
Users browsing this forum: Leewebb7, staninlowerAL, Tractor Rod and 2 guests