I am looking for the bushing that goes in the end of the ram to the rockshaft. I have had my CNH dealer look for it but to no avail.
I have the following specs:
ID .685 or 11/16
OD .775 to .80 or 13/16"
This all I could come up with from looking through older posts and taking my own measurements. I can find all kinds of 3/4" OD bushings but none 13/16".
I need to replace this bushing as there is nothing left.
Thanks a bunch
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hydraulic Ram to rockshaft bushing HELP
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 916
- Joined: Sun Feb 02, 2003 10:44 pm
- Zip Code: 60936
- Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149 - Circle of Safety: Y
- Location: Gibson City, IL
- Contact:
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Hydraulic Ram to rockshaft bushing HELP
McMaster Carr has bushings that are 13/16" OD, but ID is 5/8" so you'd have to have it milled or drilled out to 11/16".
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
Who is online
Users browsing this forum: No registered users and 22 guests