This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Greetings
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- kpaine
- 10+ Years
- Posts: 23
- Joined: Tue Jul 02, 2013 11:19 am
- Zip Code: 39735
- Tractors Owned: 1948 Farmall Cub
1950 Farmall Cub - Location: Ackerman, MS
Greetings
I am new to the Farmall world after acquiring a FCUB two weeks ago. I have some questions about the machine and I know this is the place to get answers.
The serial number on the s/n plate is FCUB 53287 which would indicate 1947. The engine casting number is 11-10-R Mod# 251342 R2 and Touch Control is 11-11-R mod#351981 R1. I have not been able to locate a engine serial number. My dilemma is the s/n is '47 but the R in the casting date is '48.
I purchased the machine from a man here locally and I have just started to look at it. I did run it some to hip some rows and plant some peas. It runs great! I am concerned that neither oil pressure gauge reads any oil pressure at all. The gauge on the oil filter housing is stuck on 5psi and the remote gauge installed on the panel just doesn't move. First thing I did was oil and filter before running the tractor and when I reassembled the oil filter I crimped the gasket and it gushed oil out of the housing, so it is pumping oil. I am getting a new gauge so I will know for sure before running it. I have ordered a new oil pan gasket and I will drop the pan to check the screen as well.
The PO has modified the tractor, much to my dismay, as you will see in photos. I really purchased the tractor to work one row cultivation in the garden, but I would like to fix it up.
I have already located another tractor that has been sitting in the woods for a number of years and I think I am going to get it and implements for a couple hundred $ as the current ower is planning to sell the tractor and implements at the scrap yard. I'll update on that later.
All I wanted was a garden tiller on steroids. Oh well, one more obsession can't hurt. Let the odyssey begin!
Here are some photos.
Thanks for any and all input and I look forward to getting to know other cub owners and enthusiasts.
Ken
The serial number on the s/n plate is FCUB 53287 which would indicate 1947. The engine casting number is 11-10-R Mod# 251342 R2 and Touch Control is 11-11-R mod#351981 R1. I have not been able to locate a engine serial number. My dilemma is the s/n is '47 but the R in the casting date is '48.
I purchased the machine from a man here locally and I have just started to look at it. I did run it some to hip some rows and plant some peas. It runs great! I am concerned that neither oil pressure gauge reads any oil pressure at all. The gauge on the oil filter housing is stuck on 5psi and the remote gauge installed on the panel just doesn't move. First thing I did was oil and filter before running the tractor and when I reassembled the oil filter I crimped the gasket and it gushed oil out of the housing, so it is pumping oil. I am getting a new gauge so I will know for sure before running it. I have ordered a new oil pan gasket and I will drop the pan to check the screen as well.
The PO has modified the tractor, much to my dismay, as you will see in photos. I really purchased the tractor to work one row cultivation in the garden, but I would like to fix it up.
I have already located another tractor that has been sitting in the woods for a number of years and I think I am going to get it and implements for a couple hundred $ as the current ower is planning to sell the tractor and implements at the scrap yard. I'll update on that later.
All I wanted was a garden tiller on steroids. Oh well, one more obsession can't hurt. Let the odyssey begin!
Here are some photos.
Thanks for any and all input and I look forward to getting to know other cub owners and enthusiasts.
Ken
- Attachments
-
- photo 3.JPG (149.54 KiB) Viewed 498 times
-
- photo 2.JPG (131.39 KiB) Viewed 498 times
-
- PO CUT THE DANG HOOD to install an alternator. I'm not overly pleased with this.
- photo 2 (2).JPG (138.52 KiB) Viewed 498 times
-
- photo 1.JPG (171.31 KiB) Viewed 498 times
- Barnyard
- Team Cub
- Posts: 24240
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Greetings
Ken, welcome to the forum. You have come to the best place on the internet for Cub information.
That is really not a dilemma. Your serial number indicates you have a 1948. !947 Cubs ended at 11347.
The engine serial number is here.
Photo from TM Tractor Parts
kpaine wrote:My dilemma is the s/n is '47 but the R in the casting date is '48.
That is really not a dilemma. Your serial number indicates you have a 1948. !947 Cubs ended at 11347.
The engine serial number is here.
Photo from TM Tractor Parts
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
- AgTires4295
- 10+ Years
- Posts: 197
- Joined: Fri Dec 30, 2011 7:36 pm
- Zip Code: 20646
- Tractors Owned: 1940 Farmall A
1947 Farmall H
1951 Farmall Cub
1970 Cub Cadet 127
1970 Simplicity Broadmoor 728 (x2)
1984 Cub Cadet 782
1964 Simplicity Landlord
2014 Simplicity Broadmoor 23/50 - Location: La Plata, MD
Re: Greetings
God, what the heck was that PO thinking, cutting into the hood like that??? If you're not good with metal work, I've seen new hoods on Ebay and Craigslist for around $200-300. Switch out that alternator and you'll be good to go.
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Greetings
Welcome to the board Ken, glad to have you with us!
As Barnyard said, you have a '48 tractor. The remote gauge in the dash is an PO modification. But there are a few who do this to see the oil pressure more easily. The hood can be replaced for a few bills, they are around. If you can pick up the second tractor for another couple bucks, I'd certainly do it! It'll save it from the scrapper, and you'll get some extra parts and implements to boot. Let us know the numbers when you get it!
As Barnyard said, you have a '48 tractor. The remote gauge in the dash is an PO modification. But there are a few who do this to see the oil pressure more easily. The hood can be replaced for a few bills, they are around. If you can pick up the second tractor for another couple bucks, I'd certainly do it! It'll save it from the scrapper, and you'll get some extra parts and implements to boot. Let us know the numbers when you get it!
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
- randallc
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: Greetings
Welcome to the forum from Arkansas. Got a good looking cub there who has survived with a few scars but still going strong. Saving them from the scrappers if you can. Good having you along.
- pickerandsinger
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: Greetings
Certainly glad you are now the owner.....The PO, needs a parole officer ....Anyhow welcome to the forum....Its more fun than a barrel of cubs....Dave
In Memory of 58,286
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Greetings
Welcome.
Brackets can be purchased or home made to tuck the alternator up under the hood.
Brackets can be purchased or home made to tuck the alternator up under the hood.
I have an excuse. CRS.
- kpaine
- 10+ Years
- Posts: 23
- Joined: Tue Jul 02, 2013 11:19 am
- Zip Code: 39735
- Tractors Owned: 1948 Farmall Cub
1950 Farmall Cub - Location: Ackerman, MS
Re: Greetings
Barnyard wrote:That is really not a dilemma. Your serial number indicates you have a 1948. !947 Cubs ended at 11347.
Thanks Barnyard I wasn't reading the list properly.
RaymondDurban wrote:Welcome to the board Ken, glad to have you with us!
The remote gauge in the dash is an PO modification. But there are a few who do this to see the oil pressure more easily. The hood can be replaced for a few bills, they are around. If you can pick up the second tractor for another couple bucks, I'd certainly do it! It'll save it from the scrapper, and you'll get some extra parts and implements to boot. Let us know the numbers when you get it!
Raymond, I am going to do my best to get the other tractor. They are a family friend and I think I can get it done. The remote oil pressure gauge is a mod. I can tell that the key is in the hole that the light switch used to be in. I am not sure what was in the hole that the oil pressure gauge is in. It is next to the battery gauge. Did this tractor originally have a keyed ignition switch or a pull knob?
- Barnyard
- Team Cub
- Posts: 24240
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Greetings
kpaine wrote: Did this tractor originally have a keyed ignition switch or a pull knob?
It would have been a pull knob switch.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 1050
- Joined: Tue Apr 26, 2011 10:47 am
- Zip Code: 44266
- Tractors Owned: 48 F Cub #11678
65 Cub Cadet 104
70 450C JD loader
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C - Circle of Safety: Y
- Location: Ravenna, Ohio
Re: Greetings
Hello Ken and welcome.
Looks like you have a great project tractor there, glad it runs well. These are great little machines as you are finding out, the more you get into them that becomes more and more evident. They do a terrific job at anything they're designed to do. If you got it to be a working tractor you're pretty much there once you get the pressure gauge issue worked out (hope that's all it is).kpaine wrote:All I wanted was a garden tiller on steroids. Oh well, one more obsession can't hurt. Let the odyssey begin!
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Greetings
Hi Ken - Welcome to the best place on the internet. Looking forward to you getting that FCUB looking more like original. You'll be so happy with your tractor. This forum loves pix - so post often.
Welcome and enjoy your time here.
Ken
Welcome and enjoy your time here.
Ken
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Greetings
Welcome to the forum!
Looks like a honest working tractor with a nice set of sweeps. Think I'd try real hard to get that other Cub w/ implements for that price, you won't be sorry you did. Also, be sure to look around if you do make that deal, there may be Cub pieces/parts around (barn, pasture, or woods) that the owner has forgotten about.
Again, glad to have ya!
Looks like a honest working tractor with a nice set of sweeps. Think I'd try real hard to get that other Cub w/ implements for that price, you won't be sorry you did. Also, be sure to look around if you do make that deal, there may be Cub pieces/parts around (barn, pasture, or woods) that the owner has forgotten about.
Again, glad to have ya!
- Mike in Louisiana
- 10+ Years
- Posts: 7812
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: Greetings
Welcome to the forum. Two is alwaysa BETTER THEN ONE
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Greetings
get the oil pressure problem solved before you worry about anything else. it may be as simple as a bad gauge, or may be something more serious. first I would remove the oil filter cover and see if oil is coming out the hole in the housing on the side opposite mounted gauge. if no oil is coming out there, try priming it by using an oil can to pump some oil into that hole then crank it some more to see if oil will then come out the hole.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Greetings
Ken:
G'day to you and congrats on acquiring your very 1st new to y addictive.ou Cub Be careful these things are very, very addictive. You could have a herd before you know it Especially if you get the one down the road.
Best thing you can do is to read the McCormick-Deering Farmall Cub Owner's Manual 5-23-47, it will be quite useful.
The guys have you well covered on the problems already identified. The links below contain lots of really good information, suggest you take a little time and follow the links.
G'day to you and congrats on acquiring your very 1st new to y addictive.ou Cub Be careful these things are very, very addictive. You could have a herd before you know it Especially if you get the one down the road.
Best thing you can do is to read the McCormick-Deering Farmall Cub Owner's Manual 5-23-47, it will be quite useful.
The guys have you well covered on the problems already identified. The links below contain lots of really good information, suggest you take a little time and follow the links.
to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of the most important resources are Owner's Manuals, Parts Catalogs and Service Manuals. The Cub Manual Server is the home of the jpg versions and the [url=http://www.farmallcub.com/[ Sorry, direct links to manual section is not allowed. ]/index.php]PDF Manuals[/url] -- well the pdf's of course Enjoy!.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Who is online
Users browsing this forum: Leewebb7, Majestic-12 [Bot] and 30 guests