This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
MAJOR setback 58 Cub Project...Help!!! pics
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Tractorboy3
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
MAJOR setback 58 Cub Project...Help!!! pics
Hi Guys....I am so Sick over this...First a brief history ...I bought this 58 cub not running, transmission locked up, with nice Woods 59 Mower for $500. Re-set the shifting forks and Transmission seemed to be fine...all the gears looked good...MAJOR BLUNDER ON MY PART..I have posted many times on the progress..Honed cylinders, new rings, new valves, re-cut seats..Paint..etc etc Finally got the tractor on 4 wheels tonight for preliminary test drive. Ran fine in 2nd gear..then tried 1st and Transmission locked up...Took cover off and discovered the Gear under the Shifting fork for 1st and Rev is Destroyed...It has a couple teeth left that are ground down badly..But most of the teeth are just GONE...See pics ..its a little hard to get picture , .. you have to look hard...
Question...Do I have to Split the tractor again to disassemble the Transmission?? Can I pull the Trans apart from the back of the tractor, leaving the torque tube/clutch assy intact.....Anyone else run into this...is this gear still available???
Thanks for any advice and or input...Tom....
, , , , , ,
Question...Do I have to Split the tractor again to disassemble the Transmission?? Can I pull the Trans apart from the back of the tractor, leaving the torque tube/clutch assy intact.....Anyone else run into this...is this gear still available???
Thanks for any advice and or input...Tom....
, , , , , ,
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: MAJOR setback 58 Cub Project...Help!!! pics
You will not like this, but yes it must be split. At the front of the transmission, not the engine.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Tractorboy3
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: MAJOR setback 58 Cub Project...Help!!! pics
John *.?-!.* cub owner wrote:You will not like this, but yes it must be split. At the front of the transmission, not the engine.
You mean from the front of the gear box...meaning I can leave the bell housing, clutch, Touch control intact??
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
- Barnyard
- Team Cub
- Posts: 24271
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: MAJOR setback 58 Cub Project...Help!!! pics
Tractorboy3 wrote:John *.?-!.* cub owner wrote:You will not like this, but yes it must be split. At the front of the transmission, not the engine.
You mean from the front of the gear box...meaning I can leave the bell housing, clutch, Touch control intact??
Yes, that is what John means.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 518
- Joined: Fri Feb 07, 2003 12:36 pm
- Location: WV, Morgantown
Re: MAJOR setback 58 Cub Project...Help!!! pics
When I replaced the Transmission case on my 52 cub, I removed the transmission from the rear of the torque tube, I left the engine coupled to the torque tube, If you do this DON'T DEPRESS THE CLUTCH PEDAL WITH THE TRANSMISSION REMOVED, When reinstalling the transmission you, Will need a 2nd.Person One person to guide the transmission shaft through the throw out bearing & into the clutch splines (This can be done threw the hand hole) 2nd person guiding The transmision back into the torque tube (It helps to have the pto engaged & rotate the pto shaft to engage the splines on the main shaft into the clutch splines. Hope this helps Dave F.
- Tractorboy3
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: MAJOR setback 58 Cub Project...Help!!! pics
Thanks Dave, John, Barnyard...I was hoping to be able to pull the gear box without disturbing the clutch, touch control, steering, etc...all freshly painted...Still a major undertaking though...Understand about NOT releasing the clutch disc
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
- pickerandsinger
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: MAJOR setback 58 Cub Project...Help!!! pics
On a happier note, you're doing a great job on the restoration.....Looks great
In Memory of 58,286
-
- 10+ Years
- Posts: 56
- Joined: Mon Jul 30, 2012 4:23 pm
- Zip Code: E7J1V7
- Tractors Owned: Farmall Cub
- Circle of Safety: Y
- Location: New Brunswick, Canada, Beechwood
Re: MAJOR setback 58 Cub Project...Help!!! pics
While you are in there, check the tiny holes in the upper part of the trans case. They look plugged or covered over in your pics. These need to be open so trans gear oil can get to the bearings.
Jerry
Jerry
-
- 10+ Years
- Posts: 429
- Joined: Tue Jun 23, 2009 6:59 pm
- Zip Code: 02346
- Tractors Owned: .
1947 Circle Cub #1110
1947 Circle Cub #1316
1948 Cub #43915
1966 Power King
189 two way Plow
54A Blade
144 Cultivator
26 ft Welcraft
1967 Case 530ck Backhoe - Location: Middleboro Massachusetts
Re: MAJOR setback 58 Cub Project...Help!!! pics
One of the Sponsors(link at the bottom of this page)- Hamilton Bob was able to provide me with a full set of gears at a very reasonable cost. Ebay is also another option. You may consider replacing the main bearings while you have it apart. I also replaced the idler gear bushing while in there. Seems to have much less noise now. There is some good info in the How To Section of the forum. Good luck. The tractor looks good !
Wally
Wally
-
- 10+ Years
- Posts: 398
- Joined: Tue Nov 30, 2010 7:54 pm
- Zip Code: 23027
- Circle of Safety: Y
Re: MAJOR setback 58 Cub Project...Help!!! pics
Here's a happy deal for ya, I have a transmission with a busted case, Pay for the shipping, flat rate box will work, and I can send you the gears out the case. Parts free of charge. Doesn't get any better than that Restoration is looking great.
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: MAJOR setback 58 Cub Project...Help!!! pics
Yep, you don't have to touch the bell housing.
Just be careful and do NOT touch the clutch pedal when you have the transmission off!!! Turned out to be a $200 mistake for me.
Just be careful and do NOT touch the clutch pedal when you have the transmission off!!! Turned out to be a $200 mistake for me.
-
- 10+ Years
- Posts: 3034
- Joined: Wed May 31, 2006 12:09 pm
- Zip Code: 74070
- Circle of Safety: Y
- Location: OK, Skiatook
Re: MAJOR setback 58 Cub Project...Help!!! pics
Here's a good "How To" for reinstalling the trans/rear end into the torque tube/clutch assy.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=141&t=21735
http://www.farmallcub.com/phpBB2/viewtopic.php?f=141&t=21735
- Tractorboy3
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: MAJOR setback 58 Cub Project...Help!!! pics
Chris D wrote:Here's a happy deal for ya, I have a transmission with a busted case, Pay for the shipping, flat rate box will work, and I can send you the gears out the case. Parts free of charge. Doesn't get any better than that Restoration is looking great.
OH MY...PM sent...
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: MAJOR setback 58 Cub Project...Help!!! pics
One additional note, make sure you reinstall the seal retainer correctly on the transmission shaft. It must be turned with the flt side out and the extension that holds the seal inside the transmission. if it is turned with the bump out it will allow the shaft to move forward and backward enough to let the pto slip.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Don McCombs
- Team Cub Mentor
- Posts: 17488
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: MAJOR setback 58 Cub Project...Help!!! pics
This photo from TM Tractor Parts may be helpful to you during re-assembly. Be sure to take lots of photos during disassembly. They will be helpful, too.
http://www.tm-tractor.com/gtr/locations_001.htm
http://www.tm-tractor.com/gtr/locations_001.htm
Who is online
Users browsing this forum: DBIZZELL and 43 guests