shyntempt wrote:While you are in there, check the tiny holes in the upper part of the trans case. They look plugged or covered over in your pics. These need to be open so trans gear oil can get to the bearings.
Jerry
Yes I will..Thanks for the tip
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
MAJOR setback 58 Cub Project...Help!!! pics
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Tractorboy3
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: MAJOR setback 58 Cub Project...Help!!! pics
Yes I will..Thanks for the tip
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
-
ricky racer
- 10+ Years
- Posts: 6333
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: MAJOR setback 58 Cub Project...Help!!! pics
Where else in the world can you go and get this much help???? That's why I love this place. These folks are the best!!! 
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
Tractorboy3
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: MAJOR setback 58 Cub Project...Help!!! pics
Don McCombs wrote:This photo from TM Tractor Parts may be helpful to you during re-assembly. Be sure to take lots of photos during disassembly. They will be helpful, too.
http://www.tm-tractor.com/gtr/locations_001.htm
That is a nice link..Thank you..and Thanks to ALL who responded..I appreciate the info ...Tom
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
-
Tractorboy3
- 10+ Years
- Posts: 183
- Joined: Thu Jan 29, 2009 9:54 pm
- Zip Code: 20707
- Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440 - Circle of Safety: Y
- Location: Laurel, Md
Re: MAJOR setback 58 Cub Project...Help!!! pics
ricky racer wrote:Where else in the world can you go and get this much help???? That's why I love this place. These folks are the best!!!
YES..You people are Great...Love this forum...Thanks again to Everyone!!!!...
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440
-
bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: MAJOR setback 58 Cub Project...Help!!! pics
Keep your shims in order when you pull the differential. Yes, you do need to pull that.
Who is online
Users browsing this forum: No registered users and 16 guests
