While preparing the underside of the gas tank for priming, I noticed 3 nuts welded to the tank frame, yet the hole on the right side front (at gas tank) appears to never had a nut welded there.
Is there supposed to be a nut welded there?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hood Nuts Gas Tank at Dash
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Hood Nuts Gas Tank at Dash
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Dale Finch
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Hood Nuts Gas Tank at Dash
If I am not mistaken, there should be four welded nuts at the rear of the tank for attachment to the instrument panel, 2 welded nuts on each side of the front to attach the doglegs, and 2 wire harness clips along the right underside for the battery cable and other wires. Finally some had a hole on the right near the welded seam between the tank and hood. This had another wire harness clip attached with a bolt.
Hope this helps.
Hope this helps.
Last edited by Dale Finch on Sat Jul 20, 2013 12:46 pm, edited 1 time in total.
-
- 10+ Years
- Posts: 2729
- Joined: Sun Oct 03, 2004 7:11 am
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub - Circle of Safety: Y
- Location: NH, Kingston
- Contact:
- olebluegrassboy
- 10+ Years
- Posts: 77
- Joined: Thu Apr 26, 2012 12:08 pm
- Zip Code: 42378
- Tractors Owned: 48 Farmall Cub, 55 Farmall 100, 35 10-20 mc cormick
- Circle of Safety: Y
Re: Hood Nuts Gas Tank at Dash
My 48 also has 3 welded nuts and 1 open hole. Dale.
Dale
"It's better to regret the things you've done than the things you didn't do."
Still can't help to think "Wish I hadn't of done that!"
"It's better to regret the things you've done than the things you didn't do."
Still can't help to think "Wish I hadn't of done that!"
- BIGHOSS
- Cub Pro
- Posts: 1741
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Re: Hood Nuts Gas Tank at Dash
"Courage is being scared to death-but saddling up anyway".......John Wayne
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Hood Nuts Gas Tank at Dash
My 47, 48, and 49 all have 3 welded nuts, with the front one on the right being just a hole in addition to one near the seam as was mentioned to allow mounting the wiring harness clip Bighoss showed. I have seen some with those clips spot welded to the tank, but none of mine are. The welded ones may have been the tanks for the short eared support, I do not remember for sure.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 5214
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Hood Nuts Gas Tank at Dash
Ken, your hood is correct, the other nut is welded to the wiring harness clip
Tim
Tim
- pickerandsinger
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: Hood Nuts Gas Tank at Dash
Ken, thanks for asking the question....I have mine off also, and wondered why I had one hole and 3 welded nuts.....Mine just has a nut and bolt with no strap, so I was a bit stymied....Strap must have gotten lost since 57.....Easy enough to make one.... Dave
In Memory of 58,286
Who is online
Users browsing this forum: DBIZZELL and 47 guests