Last fall I picked up an old WinPower 6KW PTO generator cheap.
It doesn't work.
The one diode rectifier I could identify disintegrated in my hands, so I replaced it with a new one from Radio Shack.
It still doesn't work.
There is supposed to be another larger rectifier somewhere in the generator, but I cannot find any signs of it.
All the wires in the generator are white, and disappear into the bowels of the generator, so I can't trace anything out.
Any experts out there?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
WinPower 6KW PTO Generator
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4947
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: WinPower 6KW PTO Generator
Matt:
Do you have the manual for it? If not what is the model number etc.....
Do you have the manual for it? If not what is the model number etc.....
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 4947
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: WinPower 6KW PTO Generator
It appears to be the "Winpower 10/6 PT2" model.
By the serial number I found that it was manufactured in 1966. That I do remember.
I've got the wiring diagram, but it does me no good because all I can see is a bundle of white wires that appear from behind a casting, loop around, and disappear behind the same casting. I can't tell where any of them come from or where they go to.
The casting has all the brushes and the rear bearing for the armature. I really don't want to remove it, even if I could... The bundle of wires prevents me from removing the casting as far as I can tell!!!
I have to disconnect the wires in order to see where they come from and go to, but I can't see where they come from and go to to disconnect them!
By the serial number I found that it was manufactured in 1966. That I do remember.
I've got the wiring diagram, but it does me no good because all I can see is a bundle of white wires that appear from behind a casting, loop around, and disappear behind the same casting. I can't tell where any of them come from or where they go to.
The casting has all the brushes and the rear bearing for the armature. I really don't want to remove it, even if I could... The bundle of wires prevents me from removing the casting as far as I can tell!!!
I have to disconnect the wires in order to see where they come from and go to, but I can't see where they come from and go to to disconnect them!
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: WinPower 6KW PTO Generator
Matt:
I think this page would be very useful - Winco - keep scrolling down. Owner's/Operator's Manuals, Parts and Wiring Diagrams, Troubleshooting. The wiring is pretty cool, not only a schematic but the whole parts breakdown.
Hope this helps.
I think this page would be very useful - Winco - keep scrolling down. Owner's/Operator's Manuals, Parts and Wiring Diagrams, Troubleshooting. The wiring is pretty cool, not only a schematic but the whole parts breakdown.
Hope this helps.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: WinPower 6KW PTO Generator
I have several winco generators but not this model. If the wiring diagram is correct then there are 8 diodes, a fuse, and a circuit breaker. I would check all of those. Should be two diodes each on 2 heat sinks on each side of the rear bearing along with a smaller set of diodes on the left of the rear bearings. If you get no 120 or 240 then look at the fuse, breaker, and likely the larger series field diodes. It is unlikely that the windings are bad. With a bad shunt diode(s) you shoud still get some output.
The diodes appear to be the bolt on kind (TO3?) and the case is one of the actual terminals.
The diodes appear to be the bolt on kind (TO3?) and the case is one of the actual terminals.
-
- 10+ Years
- Posts: 4947
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: WinPower 6KW PTO Generator
The shunt diodes were SHOT. They fell apart when I touched them.
The case says Winpower 10/6 PT2, but I can't find the field diodes even with the parts diagram! I can't find the brackets where they're supposedly mounted.
The case says Winpower 10/6 PT2, but I can't find the field diodes even with the parts diagram! I can't find the brackets where they're supposedly mounted.
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: WinPower 6KW PTO Generator
How many slip rings? 3 or 4?
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 0 guests