This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Block Thread Repair
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Block Thread Repair
Well, I finally got the stud out of the block and the hole tapped out. I'm reasonably certain that the last time that engine was worked on - this stud was also and issue. While the stud screws into the block now - the threads are not sharp with some play in the stud whilst in the hole. There is some concern I won't be able to properly torque this one bolt. Questions below.
1. Can the JB Weld trick be used to repair these threads, whereby the stud is inserted oiled with JB Weld in the hole - tile it cures?
2. Is the better fix to drill and tap it to the next fractional size larger in the head and the block?
3. Should I put the head on and test to see if the remaining threads will take the torque - I'm concerned this could lead to stripping the block.
4. Is there another approach?
I was reluctant to place this post under the extraction process thread as that issue is NOW solved.
Ken
1. Can the JB Weld trick be used to repair these threads, whereby the stud is inserted oiled with JB Weld in the hole - tile it cures?
2. Is the better fix to drill and tap it to the next fractional size larger in the head and the block?
3. Should I put the head on and test to see if the remaining threads will take the torque - I'm concerned this could lead to stripping the block.
4. Is there another approach?
I was reluctant to place this post under the extraction process thread as that issue is NOW solved.
Ken
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Super A
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: Block Thread Repair
Use a helicoil. That is a standard repair for such issues in BIG engines.
Al
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
- ricky racer
- 10+ Years
- Posts: 6337
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Block Thread Repair
Ken,
Every head bolt on my '53 is Heli-Coiled. The recommended torque on these bolts is high, don't remember the torque spec., When I stripped out one hole and felt another one starting to, I stopped and Heli-Coiled all of them. I used a sealer on the threads and let them set up prior to installing the head.
I think the Heli-Coil installation would be your best bet for a good fix.
Rick
Every head bolt on my '53 is Heli-Coiled. The recommended torque on these bolts is high, don't remember the torque spec., When I stripped out one hole and felt another one starting to, I stopped and Heli-Coiled all of them. I used a sealer on the threads and let them set up prior to installing the head.
I think the Heli-Coil installation would be your best bet for a good fix.
Rick
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
- Cub Pro
- Posts: 7508
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Block Thread Repair
ScottyD'sdad wrote:Same answer! Ed
Ed - Ricky - Do I need a drill press big enough to drill them out or can it be done with the 25/64" bit in a hand drill?
Glad that I've had 3 replies and all agree.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- ricky racer
- 10+ Years
- Posts: 6337
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Block Thread Repair
You can drill it out with a hand drill. Heli-Coil will specifiy a drill bit size an provide a tap the correct size for the inserts. You can buy a kit that has the drill, tap several coils and an insertion tool. They can be pricey so you might check with some area auto parts stores that loan tools, you might get lucky and find someone that will loan you the tools. You can trim the coils to length if you need to. There are other types of inserts that don't require a special size tap like Heli-Coil does. You'll need to do a little research to see if that is a good possible option too.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Block Thread Repair
there are other companies than Helicoil that sell the same type kit, do not get hung up on the brand name. You said studs, if you were referring to the head and not the manifold, it uses cap screws originally.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Bus Driver
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Re: Block Thread Repair
Drilling and tapping for the coil insert involves removing the least amount of material from the engine block of all the inserts available. It is my first choice by far.
Luck favors those who are prepared
-
- 10+ Years
- Posts: 11
- Joined: Wed Jun 26, 2013 10:09 am
- Zip Code: 70448
- Circle of Safety: Y
Re: Block Thread Repair
As always do as you feel is best. When repairing stripped threads consider using TimeSerts (www.timesert.com) in lieu of Heli Coils, they're solid metal not a spring. Although more costly I believe they make for a better repair. On all remaining threaded holes throughtly clean and chase them with the correct size thread restorer (not taps they're for cutting new threads). I use anti-seize on all of my threaded fasterers.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Block Thread Repair
John *.?-!.* cub owner wrote:there are other companies than Helicoil that sell the same type kit, do not get hung up on the brand name. You said studs, if you were referring to the head and not the manifold, it uses cap screws originally.
My Bad John - it was the 3/8 - 16 Bolt that was busted off in the head.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- gitractorman
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Block Thread Repair
I have a question about this. If you are thinking of over drilling for a Heli Coil, why wouldnt you just drill out to the next fractional size and tap the hole, or maybe even just run the next larger tap in the existing hole? It seems to me that this would remove the least amount of material. Just a thought.
Thanks
Bill
Thanks
Bill
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Block Thread Repair
Actually the helicoil removes a little less material, plus you do not need to drill the head oversize then have one odd size bolt in the mix.gitractorman wrote:...... why wouldnt you just drill out to the next fractional size and tap the hole, or maybe even just run the next larger tap in the existing hole? It seems to me that this would remove the least amount of material. Just a thought.
Thanks
Bill
PVF, those original bolts were grade 9. Grade 8 is right at it's limit when torquing to 45 ftlb. Just a caution when replacing.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Block Thread Repair
Bus Driver wrote:Drilling and tapping for the coil insert involves removing the least amount of material from the engine block of all the inserts available. It is my first choice by far.
As always, Bus Driver is giving good advice. Start with the method that removes the least of the original material. If it fails, you have other options. Properly installed Helicoils rarely fail.
Drilling/tapping to the next size leaves you with the question of what is the next step. Do you use a bigger bolt? If so, how do you torque the head down? . . .
Solid inserts require a larger hole/thread than a Helicoil. Many of them require a 2 size increase, i.e. a 3/8 insert requires a 1/2 outer thread. Based on the chart on the Timesert page, they have their own taps, about a size and a half up from the size you are repairing. Save the solid inserts for if a Helicoil fails.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: Block Thread Repair
Thanks everyone - I want to remove the least amount of material from the block as possible - Bus Driver stated - confirmed by others.
I've ordered - HeliCoil 3/8-16 from Amazon
Ken
I've ordered - HeliCoil 3/8-16 from Amazon
Ken
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Block Thread Repair
Ken:
HeliCoil is the best choice. I have done a couple dozen now and they are not as hard as I thought. I hope you ordered extra inserts -- you WILL need them - 3/8"-16 is pretty common on the Cub plus you get free shipping over $25.00
You saved a few pennies as well - Helicoil HEL5521-6 Thread Repair Kit 3/8-16in.
ReCoil inserts are basically identical to HeliCoil (the name brand) but can be purchased a bit cheaper on the net. There are a few others I think, but ReCoil and HeliCoil are the two best. I get the NAPA Balkamp taps to make bottoming taps as they are about half the price or more than HeliCoil (name brand) kits I get at my local supply house. ReCoil is Alcoa which was new to me, so both Emhart and Alcoa are US based.
When it comes to freehand drilling in materials in my trade I have no qualms at all, but when I am freehand drilling in cast like a final or the block, I would much prefer a drill press or if that is impractical a Mag Drill and a broach. That way it is guaranteed to be perpendicular to the deck. I am terrified of drilling slightly off perpendicular as that would really affect how the head bolts will torque down. I may be frettin for nuttin .. but thems the thoughts that run through my cranium. Not all of us have access to a Mag Drill or a Bridgeport. Be nice ifn we did. Wish you luck
Nice thing about this thread is that is has allowed me to relocate my missing bookmarks
HeliCoil is the best choice. I have done a couple dozen now and they are not as hard as I thought. I hope you ordered extra inserts -- you WILL need them - 3/8"-16 is pretty common on the Cub plus you get free shipping over $25.00
You saved a few pennies as well - Helicoil HEL5521-6 Thread Repair Kit 3/8-16in.
ReCoil inserts are basically identical to HeliCoil (the name brand) but can be purchased a bit cheaper on the net. There are a few others I think, but ReCoil and HeliCoil are the two best. I get the NAPA Balkamp taps to make bottoming taps as they are about half the price or more than HeliCoil (name brand) kits I get at my local supply house. ReCoil is Alcoa which was new to me, so both Emhart and Alcoa are US based.
When it comes to freehand drilling in materials in my trade I have no qualms at all, but when I am freehand drilling in cast like a final or the block, I would much prefer a drill press or if that is impractical a Mag Drill and a broach. That way it is guaranteed to be perpendicular to the deck. I am terrified of drilling slightly off perpendicular as that would really affect how the head bolts will torque down. I may be frettin for nuttin .. but thems the thoughts that run through my cranium. Not all of us have access to a Mag Drill or a Bridgeport. Be nice ifn we did. Wish you luck
Nice thing about this thread is that is has allowed me to relocate my missing bookmarks
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Who is online
Users browsing this forum: Dave Downs, Flemmingth and 53 guests