This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Timing--SA vs Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 3094
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: 71770
- Location: AR, Waldo
Timing--SA vs Cub
I believe that on a properly timed Cub the rotor should point to 1 o'clock position when piston #1 is at tdc on the compression stroke. If this statement is true, would that also be true for a SA? Both have mags. Thanks, Dan
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Don't know about a Super A, but on a cub magneto the rotor will actually be about 11:30 or so position until it "snaps" then will go to aobut the 1 oclock position. It won't stop dead on the nujber one position, which is about 12 to 12:30 position. look for the 1 with a circle around it on the cap of the SA mag. roto shoud be just before it until impules "snaps" then stop just after it.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Cub Pro
- Posts: 3094
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: 71770
- Location: AR, Waldo
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0
- 258
-
by Dusty B
Tue Jun 29, 2021 7:32 am
-
-
Super A Timing Attachment(s)
by tst » Fri Jan 12, 2024 6:40 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 11
- 761
-
by Super A
Tue Jan 16, 2024 6:52 am
-
-
-
Setting the timing on a 100
by customcutter » Wed May 10, 2023 2:35 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 14
- 520
-
by customcutter
Sat May 13, 2023 4:50 pm
-
-
-
Ignition Timing Attachment(s)
by lolbell » Tue Nov 29, 2022 4:14 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 256
-
by lolbell
Wed Nov 30, 2022 3:33 pm
-
-
-
Farmall governor timing
by Pete1975 » Wed May 25, 2022 8:09 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 0
- 150
-
by Pete1975
Wed May 25, 2022 8:09 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 2 guests