This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Bearing Installation

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
PVF1799
10+ Years
10+ Years
Posts: 1475
Joined: Fri Mar 15, 2013 9:46 pm
Zip Code: 12009
eBay ID: kepara
Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower.
Circle of Safety: Y
Location: Altamont, NY
Contact:

Bearing Installation

Postby PVF1799 » Tue Aug 13, 2013 3:05 pm

Hi all - when installing bearings on shafts like the front spindles - it's recommended that a bearing heater be used. Now I don't have that kind of spare change around.

I have a brass drift pin set - can't the bearings just be warmed in the oven and tapped on? This seems to be what the service manual calls for.

SPONSOR AD

Sponsor



Sponsor
 

User avatar
ricky racer
10+ Years
10+ Years
Posts: 6315
Joined: Wed Sep 12, 2007 8:40 pm
Zip Code: 49120
Circle of Safety: Y
Location: Niles / Buchanan, Michigan

Re: Bearing Installation

Postby ricky racer » Tue Aug 13, 2013 3:55 pm

A bearing heater is the preferred method however heating them in an oven will work just fine. Another way I was taught to heat bearings is put them in a pan of oil and heat the oil on a burner. The thing you want to watch is not getting the bearings to hot, over 200 degrees and not getting them hot enough and having them get locked on the shaft half way on. I would shoot for 180 to 200 degrees for the bearing installation.

To install the bearings on the spindle it would be a good idea to have a piece of pipe that will fit over the spindle and seat on the inner bearing race and a heavy hammer ready just in case the bearing doesn't slide all the way onto the spindle. You can get by with a drift punch but something that has more surface contact with the race will lessen the possibility of chipping the race. With any luck you won't need anything but plan on it happening. A little amount of oil or grease on the shaft will help a bit too. If the seals need to go on first (I don't have a diagram in front of me) make sure do that first. Review the assembly before you put the bearings on. :wink:

P.S. When you get the bearings heated up there in NJ, they will most likely be cooled down by the time you install them in NY. :lol:
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub

User avatar
Boss Hog
Cub Pro
Cub Pro
Posts: 10290
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: Bearing Installation

Postby Boss Hog » Tue Aug 13, 2013 5:12 pm

I have not told a lot of folks this :D But I polish the spindle with emery cloth , just enough that the bearing will slid on with a little effort, next time no fuss getting the bearing off :wink: You get the pre-load with the spindle nut.
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

User avatar
PVF1799
10+ Years
10+ Years
Posts: 1475
Joined: Fri Mar 15, 2013 9:46 pm
Zip Code: 12009
eBay ID: kepara
Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower.
Circle of Safety: Y
Location: Altamont, NY
Contact:

Re: Bearing Installation

Postby PVF1799 » Tue Aug 13, 2013 5:56 pm

Boss Hog wrote:I have not told a lot of folks this :D But I polish the spindle with emery cloth , just enough that the bearing will slid on with a little effort, next time no fuss getting the bearing off :wink: You get the pre-load with the spindle nut.
Boss


David, do you mean a grit like crocus cloth or not that fine?

User avatar
Boss Hog
Cub Pro
Cub Pro
Posts: 10290
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: Bearing Installation

Postby Boss Hog » Tue Aug 13, 2013 5:58 pm

I am not sure I will look but I think it is between 220 and 400
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

User avatar
Boss Hog
Cub Pro
Cub Pro
Posts: 10290
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: Bearing Installation

Postby Boss Hog » Tue Aug 13, 2013 6:24 pm

It is 320 grit
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

Gary Dotson
Team Cub Mentor
Team Cub Mentor
Posts: 5618
Joined: Thu Aug 03, 2006 6:20 am
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety: Y
Location: OH West Mansfield

Re: Bearing Installation

Postby Gary Dotson » Wed Aug 14, 2013 7:18 am

I really see no reason why those spindle bearings need to be press fit, a snug slip fit should suffice. Anyway, I keep a toaster oven in my shop for such occasions.

Steve K. CALIF
10+ Years
10+ Years
Posts: 371
Joined: Mon Feb 03, 2003 1:05 pm
Zip Code: 93636
Tractors Owned: 1947 Cub #550
1962 LoBoy
Circle of Safety: Y
Location: Madera, CA.

Re: Bearing Installation

Postby Steve K. CALIF » Wed Aug 14, 2013 10:30 am

Boss Hog is correct in cleaning and smoothing up the shaft where the Timken or other roller bearing cone will ride. You should not ever have to heat up this type of bearing in this application to make it fit. They are made to "slide" on. Yes, sometimes a little persuasion is necessary. Be careful and only use the inside of the cone if you are using a soft drift to put it on. In the industrial world there are many applications where it is needed to heat a bearing to get it onto the shaft for an interference fit. Those fits come in lots of styles. Sometimes even need to cool down the shaft to put the heated bearing on. Very tight fit!
Also, don't ever, no matter how tempted, use a plain old torch to heat the bearing for installation! Not good for the bearing at all. Maybe a rosebud tip, moving a lot and not in one place too long. Take these notes for what you will from an old time bearing and gearing salesman.

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Bearing Installation

Postby Rudi » Thu Aug 15, 2013 9:49 am

Ken:

I just googled bearing heaters .. then saw this at Grainger - Bearing Heaters and after I recovered from my :coffee: going down the wrong pipe .... :shock: :roll: :lol:

Since I know I have at least a few front spindle bearings to do, I am going to take Steve's, David's, Gary's and Rick's advice. Emery cloth is a staple in my tractor shop and I am going down to my local Habitat for Humanity Restore store and get me a used toaster oven for the pole barn :idea: :!: I don't want to go through what we did last year at Cecil's. Course we can discuss that further in about 7 weeks or so :big smile:
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


old red 1950
10+ Years
10+ Years
Posts: 14
Joined: Fri Aug 16, 2013 5:34 pm
Zip Code: 68756
Tractors Owned: Farmalls: 1948 Cub, !943 H, 450G, 560D, 1066, 2 F20s Massey Harris: 1938 101, 1941 101jr, 1949 Pony, 1950 22rc, 1951 30rc, 1951 44rc, 1953 & 1954 33rc: 1945 allis chqalmers C: 1947 COOP E3: !947 Ford Ferguson 2N: 19? Satoh 650G: several parts tractors
Location: ne Nebraska

Re: Bearing Installation

Postby old red 1950 » Fri Aug 16, 2013 6:20 pm

If you can find a metal pan that the bearing will fit in, add enough oil (engine oil, hydraulic oil whatever type you have) to cover the bearing!! Put the bearing in it and heat it, I have an old hot plate heater but anything that will heat it to around 250 degrees will work!!! Leave brg in it till you are sure the brg is good and hot, take a pair of pliers remove the brg from hot oil and it will more likely then not slip right over the shaft, let it cool by itself and should be tight on the shaft!!! Has worked numerous times for me even with the larger ball bearings!!!!


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 5 guests