This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Zenith Carb.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 67
- Joined: Mon Aug 20, 2012 6:12 pm
- Zip Code: 37801
- eBay ID: bill6883
- Tractors Owned: 49 Cub, 52 Cub, 57 Cub,71 MTD, Unico, Another 71 MTD Unico, 93 Craftsman, GT 6000, 97 Yard Machines and more.
- Location: Maryville, Tn.
Zenith Carb.
Hi guys, looking for some info on Zenith carb. bought almost new on E-bay for 40.00. I think it is running a little rich from mid-range to full rpm. I got the numbers and think it's from a later cub or lowboy. Carb # on tag, 4 02 -13794E -75123C 93 . My ? is if the main jet is too large,where can i get a replacementof the correct size?. It runs great but seems to sputter a little form midrange on up to wot wich it didn't do with the carb off my 49, it was smooth as could be at all speeds. Thanks in advance for any and all info. WLM Cub
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Zenith Carb.
Thinking, partial blockage in carburetor high idle circuit or float adjustment. Could also be a fuel flow problem, if the problem shows up a minute or two after engine throttled up.
E-bay carburetor.
E-bay carburetor.
I have an excuse. CRS.
-
- Team Cub Mentor
- Posts: 17488
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Zenith Carb.
Before I started swapping parts, I'd clean the carburetor.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Zenith Carb.
It should run fine on your cub without changing anything clean the carb as Don said
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 67
- Joined: Mon Aug 20, 2012 6:12 pm
- Zip Code: 37801
- eBay ID: bill6883
- Tractors Owned: 49 Cub, 52 Cub, 57 Cub,71 MTD, Unico, Another 71 MTD Unico, 93 Craftsman, GT 6000, 97 Yard Machines and more.
- Location: Maryville, Tn.
Re: Zenith Carb.
Hi Eugene, I did all that and more before I put it on, Sprayed everything and cleaned all jets with carb cleaner and compressed air although it looked Brand new inside and out, then checked the float level. Good to go. Starts great and runs smooth up to half throtle then it starts to go rich form there on up to full. The needle does not leak down as I found by accident and left the shutoff open all night,no leak down at all. Thanks again for all you folks do on the fourum. WLM Cub
-
- 10+ Years
- Posts: 67
- Joined: Mon Aug 20, 2012 6:12 pm
- Zip Code: 37801
- eBay ID: bill6883
- Tractors Owned: 49 Cub, 52 Cub, 57 Cub,71 MTD, Unico, Another 71 MTD Unico, 93 Craftsman, GT 6000, 97 Yard Machines and more.
- Location: Maryville, Tn.
Re: Zenith Carb.
Thanks Don, but did that And thanks for the reply. WLM Cub.
-
- 10+ Years
- Posts: 67
- Joined: Mon Aug 20, 2012 6:12 pm
- Zip Code: 37801
- eBay ID: bill6883
- Tractors Owned: 49 Cub, 52 Cub, 57 Cub,71 MTD, Unico, Another 71 MTD Unico, 93 Craftsman, GT 6000, 97 Yard Machines and more.
- Location: Maryville, Tn.
Re: Zenith Carb.
Hi Boss, Thank you for the reply. I thought I had read in one of your posts sometine last year that the later carbs had larger main jets in them with the larger air intake hose and to change the jets to a smaller size. Maybe it was on the other forum. Anyway Thank you again for all you folks do and keep up the good work, WLM Cub
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Zenith Carb.
I don't think the main jet size is the problem because the main jet feeds both the low and high idle circuits in the carburetor.
If you want to you can remove the main jet. There should be a number stamped on it indicating the orifice diameter. Try carburetor shops or small engine shops to obtain a jet with a smaller orifice. Wisconsin engine parts books list about 20 or more main jet sizes for one model carburetor.
Have you check the ignition system?
If you want to you can remove the main jet. There should be a number stamped on it indicating the orifice diameter. Try carburetor shops or small engine shops to obtain a jet with a smaller orifice. Wisconsin engine parts books list about 20 or more main jet sizes for one model carburetor.
Have you check the ignition system?
I have an excuse. CRS.
-
- 10+ Years
- Posts: 67
- Joined: Mon Aug 20, 2012 6:12 pm
- Zip Code: 37801
- eBay ID: bill6883
- Tractors Owned: 49 Cub, 52 Cub, 57 Cub,71 MTD, Unico, Another 71 MTD Unico, 93 Craftsman, GT 6000, 97 Yard Machines and more.
- Location: Maryville, Tn.
Re: Zenith Carb.
Hi Eugene, just been tuned up 2 months ago and ran great until I changed the carb. I put the old one back on the 49 and the new one on this one wich is a 52. Like Boss said I'll just run it for now and keep an eye on the plugs. She purrs like a kitten at Idle and has good power at wot. Thank you again,WLM Cub
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: Zenith Carb.
How do you know it is running rich?
Bad plugs, wires, timing, lean running, carb to manifold gasket or warp causing an air leak, severely worn throttle shaft, broken spark advance will also give the same symptoms.
The idle circuit function is basically unrelated to the size of the main jet. The main jet limits the fuel above idle speed. Regulation of fuel above idle is by the discharge nozzle and the well or air bleed jet. That jet is important and if plugged then the engine will run rich above idle speed. The other regulation of the mixture is by those little holes on the side of the discharge nozzle. Make sure all are open AND run a thick wire down the center of the nozzle to make sure the center is open to full size.
An air leak through the bowl gasket into the bowl will also cause an engine to run rich.
I assume this is a model 68 carb in which case just about any of them should work on a cub. The size of the main jet is unlikely to be the problem.
Bad plugs, wires, timing, lean running, carb to manifold gasket or warp causing an air leak, severely worn throttle shaft, broken spark advance will also give the same symptoms.
The idle circuit function is basically unrelated to the size of the main jet. The main jet limits the fuel above idle speed. Regulation of fuel above idle is by the discharge nozzle and the well or air bleed jet. That jet is important and if plugged then the engine will run rich above idle speed. The other regulation of the mixture is by those little holes on the side of the discharge nozzle. Make sure all are open AND run a thick wire down the center of the nozzle to make sure the center is open to full size.
An air leak through the bowl gasket into the bowl will also cause an engine to run rich.
I assume this is a model 68 carb in which case just about any of them should work on a cub. The size of the main jet is unlikely to be the problem.
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Zenith Carb.
That would be a yup. Big yup.Landreo wrote: air bleed jet. That jet is important and if plugged then the engine will run rich above idle speed.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 67
- Joined: Mon Aug 20, 2012 6:12 pm
- Zip Code: 37801
- eBay ID: bill6883
- Tractors Owned: 49 Cub, 52 Cub, 57 Cub,71 MTD, Unico, Another 71 MTD Unico, 93 Craftsman, GT 6000, 97 Yard Machines and more.
- Location: Maryville, Tn.
Re: Zenith Carb.
Thanks again guys, I guess I'll try to find out what the carb came off. Does anyone reconize the numbers I first posted. Landero, Where do you find the model # 68 on the carb? Is that a IH 3 at the bottom of the tag? 21523 C93-BKMV, Thanks again all and will check back on here tomorrow . WLM Cub
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Zenith Carb.
does yours have 4 or 5 screws holding it together
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
-
- 10+ Years
- Posts: 67
- Joined: Mon Aug 20, 2012 6:12 pm
- Zip Code: 37801
- eBay ID: bill6883
- Tractors Owned: 49 Cub, 52 Cub, 57 Cub,71 MTD, Unico, Another 71 MTD Unico, 93 Craftsman, GT 6000, 97 Yard Machines and more.
- Location: Maryville, Tn.
Re: Zenith Carb.
Hi Boss, it has 5 screws unlike the one in Eugene's website picture wich shows the carb # without the E at the end. {13794 E] Also the choke rod attaches ti the inside as does the throtle. Thanl you and Eugene for your thme and patience. WLM Cub
-
- Similar Topics
- Replies
- Views
- Last post
-
- 13
- 553
-
by KETCHAM
Thu May 06, 2021 10:16 am
-
- 7
- 228
-
by Dale Finch
Tue Jul 26, 2022 8:40 pm
-
- 5
- 290
-
by KETCHAM
Mon Mar 11, 2024 10:13 am
-
- 4
- 300
-
by KETCHAM
Tue Nov 07, 2023 1:37 pm
-
- 6
- 236
-
by Greenthumbfarms
Thu Feb 17, 2022 1:57 pm
Who is online
Users browsing this forum: Inspectorjoe, Majestic-12 [Bot] and 2 guests