Just got a 1955 cub with a woods mower pickup a #54 blade most fittings were there but missing part number 651237 R need two anyone have extras? or know where we can purchase them?
vern b
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Help getting blade on cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 33
- Joined: Sat Sep 15, 2012 8:55 pm
- Zip Code: 16354
- Skype Name: vernb
- Tractors Owned: 1950 cub
- Location: Titusville,Pa
Help getting blade on cub
YOU CAN DO IT,YOU CAN DO IT,IF YOU PUT YOUR MINE TO IT !
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Help getting blade on cub
If you are talking about the spacers, just make some from square stock (1 1/2 inch square with 5/8ths hole.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
- Barnyard
- Team Cub
- Posts: 24271
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Help getting blade on cub
TM has them, if you can't make them. http://www.tmtractor.com/new/gb/393fp.htm
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 160
- Joined: Wed Aug 07, 2013 10:09 am
- Zip Code: 14103
- Tractors Owned: 1955 farmall cub w/ fast hitch
Implements:
fast hitch moldboard plow
fast hitch disc harrow
front blade
Danco c-3 mower - Circle of Safety: Y
Re: Help getting blade on cub
I thought I was missing one of those too, but I found it when I put on my cultivators - it was stuck in the middle of the casting where i couldn't see it!
-
- 10+ Years
- Posts: 33
- Joined: Sat Sep 15, 2012 8:55 pm
- Zip Code: 16354
- Skype Name: vernb
- Tractors Owned: 1950 cub
- Location: Titusville,Pa
Re: Help getting blade on cub
Thanks barnyard I just order two one would have to buy 12 feet of material just for a few inches.
YOU CAN DO IT,YOU CAN DO IT,IF YOU PUT YOUR MINE TO IT !
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Help getting blade on cub
You went to the wrong store, I can buy local by the foot. 12 ft., that's three toolbars!
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- 10+ Years
- Posts: 33
- Joined: Sat Sep 15, 2012 8:55 pm
- Zip Code: 16354
- Skype Name: vernb
- Tractors Owned: 1950 cub
- Location: Titusville,Pa
Re: Help getting blade on cub
I was quoteing from my supplier for the machine shop.
YOU CAN DO IT,YOU CAN DO IT,IF YOU PUT YOUR MINE TO IT !
- Barnyard
- Team Cub
- Posts: 24271
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Help getting blade on cub
My welder will sell me any length I want if he has it on hand. Sometimes a short piece is scrap to him.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 33
- Joined: Sat Sep 15, 2012 8:55 pm
- Zip Code: 16354
- Skype Name: vernb
- Tractors Owned: 1950 cub
- Location: Titusville,Pa
Re: Help getting blade on cub
thanks Barnyard Tought of useing the lost form casting to make what I needed has any one done this?
YOU CAN DO IT,YOU CAN DO IT,IF YOU PUT YOUR MINE TO IT !
-
- Team Cub
- Posts: 11859
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Help getting blade on cub
Vern, Unless you do sand casting yourself, I'll think you'll find it is far more expensive to have them cast than to buy them or make them out of stock.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
Who is online
Users browsing this forum: No registered users and 48 guests