This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Help getting blade on cub

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
vern b
10+ Years
10+ Years
Posts: 33
Joined: Sat Sep 15, 2012 8:55 pm
Zip Code: 16354
Skype Name: vernb
Tractors Owned: 1950 cub
Location: Titusville,Pa

Help getting blade on cub

Postby vern b » Mon Sep 16, 2013 5:58 pm

Just got a 1955 cub with a woods mower pickup a #54 blade most fittings were there but missing part number 651237 R need two anyone have extras? or know where we can purchase them?

vern b
YOU CAN DO IT,YOU CAN DO IT,IF YOU PUT YOUR MINE TO IT ! :)
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
danovercash
10+ Years
10+ Years
Posts: 3369
Joined: Mon Feb 17, 2003 8:48 pm
Zip Code: 28081
Circle of Safety: Y
Location: NC, Kannapolis

Re: Help getting blade on cub

Postby danovercash » Mon Sep 16, 2013 6:18 pm

If you are talking about the spacers, just make some from square stock (1 1/2 inch square with 5/8ths hole.
"I'd rather be a mechanic in the shop"- Henry Ford

252646 & 221525. 195897 (Gone, but not forgotten)
Top
User avatar
Barnyard
Team Cub
Team Cub
Posts: 24263
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)
Contact:
Contact Barnyard

Re: Help getting blade on cub

Postby Barnyard » Mon Sep 16, 2013 6:31 pm

TM has them, if you can't make them. http://www.tmtractor.com/new/gb/393fp.htm
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.

Circle of Safety
Top
Eoghan
10+ Years
10+ Years
Posts: 160
Joined: Wed Aug 07, 2013 10:09 am
Zip Code: 14103
Tractors Owned: 1955 farmall cub w/ fast hitch
Implements:
fast hitch moldboard plow
fast hitch disc harrow
front blade
Danco c-3 mower
Circle of Safety: Y

Re: Help getting blade on cub

Postby Eoghan » Mon Sep 16, 2013 8:00 pm

I thought I was missing one of those too, but I found it when I put on my cultivators - it was stuck in the middle of the casting where i couldn't see it!
Top
vern b
10+ Years
10+ Years
Posts: 33
Joined: Sat Sep 15, 2012 8:55 pm
Zip Code: 16354
Skype Name: vernb
Tractors Owned: 1950 cub
Location: Titusville,Pa

Re: Help getting blade on cub

Postby vern b » Mon Sep 16, 2013 8:09 pm

Thanks barnyard I just order two one would have to buy 12 feet of material just for a few inches.
YOU CAN DO IT,YOU CAN DO IT,IF YOU PUT YOUR MINE TO IT ! :)
Top
danovercash
10+ Years
10+ Years
Posts: 3369
Joined: Mon Feb 17, 2003 8:48 pm
Zip Code: 28081
Circle of Safety: Y
Location: NC, Kannapolis

Re: Help getting blade on cub

Postby danovercash » Mon Sep 16, 2013 8:20 pm

You went to the wrong store, I can buy local by the foot. 12 ft., that's three toolbars!
"I'd rather be a mechanic in the shop"- Henry Ford

252646 & 221525. 195897 (Gone, but not forgotten)
Top
vern b
10+ Years
10+ Years
Posts: 33
Joined: Sat Sep 15, 2012 8:55 pm
Zip Code: 16354
Skype Name: vernb
Tractors Owned: 1950 cub
Location: Titusville,Pa

Re: Help getting blade on cub

Postby vern b » Mon Sep 16, 2013 8:40 pm

I was quoteing from my supplier for the machine shop.
YOU CAN DO IT,YOU CAN DO IT,IF YOU PUT YOUR MINE TO IT ! :)
Top
User avatar
Barnyard
Team Cub
Team Cub
Posts: 24263
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)
Contact:
Contact Barnyard

Re: Help getting blade on cub

Postby Barnyard » Mon Sep 16, 2013 8:49 pm

My welder will sell me any length I want if he has it on hand. Sometimes a short piece is scrap to him.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.

Circle of Safety
Top
vern b
10+ Years
10+ Years
Posts: 33
Joined: Sat Sep 15, 2012 8:55 pm
Zip Code: 16354
Skype Name: vernb
Tractors Owned: 1950 cub
Location: Titusville,Pa

Re: Help getting blade on cub

Postby vern b » Mon Sep 16, 2013 9:15 pm

thanks Barnyard Tought of useing the lost form casting to make what I needed has any one done this?
YOU CAN DO IT,YOU CAN DO IT,IF YOU PUT YOUR MINE TO IT ! :)
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11850
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Help getting blade on cub

Postby Bob McCarty » Mon Sep 16, 2013 9:19 pm

Vern, Unless you do sand casting yourself, I'll think you'll find it is far more expensive to have them cast than to buy them or make them out of stock.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: CharlieK, Majestic-12 [Bot] and 22 guests