This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Manifold pipe loose
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 150
- Joined: Mon Mar 02, 2009 10:57 pm
- Zip Code: 75497
Re: Manifold pipe loose
I also have redone a cub or two. I have removed the remains of a broken pipe in the manifold by heating the pipe and getting it loose and collapsing it, Then cleaned the threads with a dremel tool and the dremel wirebrush. The first cub I did was before the internet was around to ask advice. Was not my intention to insult with the post for the new manifold. I inch pipe tap priced would be $20 dollars on ebay and up top $90 at other places. I did this with the manifold on the tractor. Then I removed the manifold the passages were close to being blocked by baked in oil. That is why if I had a place to buy a $95 dollar manifold that was clean inside and out I would have done it. But you know to each his on.
-
- Cub Star!
- Posts: 234
- Joined: Thu Apr 22, 2021 7:58 pm
- Zip Code: 66720
Re: Manifold pipe loose
I replaced my manifold too but only because the pipe had been welded to it and it broke off again. I don't remember what I spent for the new manifold but it was worth it to me at the time.
-
- Cub Pro
- Posts: 7508
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Manifold pipe loose
I have the tap. He's bringing the manifold to Cecil's cubfest. We'll fix it, if it is fixable.
Ed
Ed
-
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: Manifold pipe loose
I don't think anyone is insulting any one by deciding whether or not to buy a new manifold....Don't worry about it....I simply believe if it can be fixed it will be.... Kinda like fixing a tire or buying a new one.. Maybe that will clear it up for you...
As you say to each his own....hurleyjd wrote:That is why if I had a place to buy a $95 dollar manifold that was clean inside and out I would have done it. But you know to each his on.
In Memory of 58,286
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Manifold pipe loose
hurleyjd wrote:How about spending $95 and buying a new manifold, problem solved for your lifetime. Yes Rudy doing pretty well here, if our government does not get together and solve some problems, I will get some real estate dealers name from you and move north.
JD:
There is some real nice Cub friendly land real close by. How many acres
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 4949
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Manifold pipe loose
If the threads are beyond repair, you can go ahead and do a "last chance" repair.
Weld or braze a new BLACK pipe in. Don't use galvanized because welding on galvanized creates phosgene gas, which will mess you up as bad or worse than the isocyanides in paint hardener.
Weld or braze a new BLACK pipe in. Don't use galvanized because welding on galvanized creates phosgene gas, which will mess you up as bad or worse than the isocyanides in paint hardener.
-
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
-
- Cub Pro
- Posts: 7508
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Manifold pipe loose
Manifold.is.rethreaded...(Sorry.spacebar.is.not.working,suddenly.)
Ed
Ed
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Manifold pipe loose
pickerandsinger wrote:I simply believe if it can be fixed it will be.... Kinda like fixing a tire or buying a new one..
Kinda like fixing a generator or replacing it with an alternator.
-
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: Manifold pipe loose
....Headers were my next choice,Jim .....Gotta say that Ed is a persistent sort....But the tap finally caught and threaded ....Nice job also I might add....Installed the black pipe (thanks Matt)....I put a little exhaust sealer to build up the ridge on the manifold ( 2000 degree stuff) and let it harden yesterday and last night...Will pretty it up and paint it this AM...Hey, it was worth the carrying ons at the vise, even if I had to throw it away... ....But we didn't....Thanks Ed, DaveJim Becker wrote:Kinda like fixing a generator or replacing it with an alternato
In Memory of 58,286
-
- Similar Topics
- Replies
- Views
- Last post
-
-
loose/wobbles throttle quadrant Attachment(s)
by Leewebb7 » Sat Jan 06, 2024 10:49 am » in Farmall Cub - 7
- 832
-
by NJ Farmer
Sun Jan 07, 2024 4:47 am
-
-
- 6
- 256
-
by Glen
Tue Jan 03, 2023 11:00 pm
-
-
Loose steering box on a 1962 Farmall Cub. How would you fix this? Attachment(s)
by sgraber » Sun Aug 06, 2023 11:33 am » in Farmall Cub - 19
- 431
-
by cdahl383
Wed Aug 09, 2023 8:00 pm
-
-
- 16
- 588
-
by Clemsonfor
Sat Apr 02, 2022 7:57 am
-
- 0
- 93
-
by goxu1
Sat May 07, 2022 6:10 am
Who is online
Users browsing this forum: Majestic-12 [Bot] and 10 guests