This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Different Discharge Nozzles
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 327
- Joined: Mon Dec 08, 2008 8:28 pm
- Zip Code: 65018
- Tractors Owned: 1947 cub #11248
1948 #39811 trimmed dash
1950 VAC Case - Circle of Safety: Y
- Location: MO California
- Contact:
Different Discharge Nozzles
I have three discharge nozzles here that you are looking at. The arrows are pointing at the holes on each one. The one on the right came off a 47. No hole in the end. The other two I have know idea what year. The parts book does show different numbers but states they will all work. Just sharing what I have found.
I don't know my right from my left. sorry
-
- Cub Pro
- Posts: 7503
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Different Discharge Nozzles
They need to match the high speed jet. There are several different jet openings, too. Bob McCarty has the measurements, of the openings.
Ed
Ed
-
- 10+ Years
- Posts: 327
- Joined: Mon Dec 08, 2008 8:28 pm
- Zip Code: 65018
- Tractors Owned: 1947 cub #11248
1948 #39811 trimmed dash
1950 VAC Case - Circle of Safety: Y
- Location: MO California
- Contact:
Re: Different Discharge Nozzles
Now that sounds interesting! Been cleaning two carburetors with parts of a third carburetors. I know the jet that came with the 47 is shot. So I will have a 50-50 chance when I put them back together they match.
Ron
Ron
- Bill Hudson
- Team Cub
- Posts: 9516
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: Different Discharge Nozzles
This is information that Bob McCarty posted earlier. I'm sure that he will be along shortly to interpret it.
Jets For IH Carb
251234R94 364579R91 405004R91 63349C91
Discharge 52 39 39 39
Mainjet 0.032 0.034 0.040 0.040
Bleed 57 53
Idle Jet 75 75 75 75
Bill
Edit: Boy, the information sure didn't look like it does on the post, when I previewed it. Bob has the good stuff.
Jets For IH Carb
251234R94 364579R91 405004R91 63349C91
Discharge 52 39 39 39
Mainjet 0.032 0.034 0.040 0.040
Bleed 57 53
Idle Jet 75 75 75 75
Bill
Edit: Boy, the information sure didn't look like it does on the post, when I previewed it. Bob has the good stuff.
Last edited by Bill Hudson on Sun Sep 29, 2013 6:51 pm, edited 2 times in total.
-
- Team Cub
- Posts: 11825
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Different Discharge Nozzles
That data is all from the GSS-1411 manual with the specs for a later carb added. The aftermarket kits don't have the correct size jets, and I'm sure a lot of parts get mixed up. To be absolutely correct, I think you'd need to measure the size of the bleed and then match the discharge nozzle and main jet to it. I'm not sure that on an older/used Cub that it makes that much difference.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- Team Cub Mentor
- Posts: 4127
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
Re: Different Discharge Nozzles
The discharge tube with no hole in the end goes with the main jet that looks like it has a huge hole in the end. It won't work with any of the other main jets.
Who is online
Users browsing this forum: No registered users and 31 guests