This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Power King wheels will fit Cubs?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Xperimental
- 10+ Years
- Posts: 159
- Joined: Sun Apr 07, 2013 10:41 pm
- Zip Code: 47359
- Tractors Owned: Farmall 200
1956 Farmall Cub
1961 Farmall Cub
Farmall 460D
International 656D Hi-Clear
Farmall 806D
Allis Chalmers 5020 - Location: Blackford County, Indiana
Power King wheels will fit Cubs?
I am 99.9% certain but wanted check here. Will the 24" wheels from a Power King 2418 fit Cubs? I have read in many places that they are identical and were apparently made by IH.
-
ricky racer
- 10+ Years
- Posts: 6334
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Power King wheels will fit Cubs?
That is a true statement.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
CubitisNH
- 10+ Years
- Posts: 565
- Joined: Sun May 14, 2006 3:59 pm
- Zip Code: 00000
- Circle of Safety: Y
- Location: Plymouth,NH
Re: Power King wheels will fit Cubs?
Yes,they fit,as well as the front wheels and all the weights also. I'm fairly certain F&H made the rear wheel centers(discs)for IH-have seen it stamped in on the disc.
Mike
Mike
How can you have too many Cubs????
-
Alan Riley
- 10+ Years
- Posts: 449
- Joined: Wed Feb 05, 2003 11:49 pm
- Zip Code: 71328
- Location: LA, Deville
Re: Power King wheels will fit Cubs?
The rear wheels and tires on my Cub are from a Power King 2414.
The Power King front wheels will fit but are not exactly identical. The gap between the rim and the center is greater on them.
The Power King front wheels will fit but are not exactly identical. The gap between the rim and the center is greater on them.
Old Age: The phase of life when nothing works and everything hurts...
-
Xperimental
- 10+ Years
- Posts: 159
- Joined: Sun Apr 07, 2013 10:41 pm
- Zip Code: 47359
- Tractors Owned: Farmall 200
1956 Farmall Cub
1961 Farmall Cub
Farmall 460D
International 656D Hi-Clear
Farmall 806D
Allis Chalmers 5020 - Location: Blackford County, Indiana
Re: Power King wheels will fit Cubs?
Thanks for confirming that these hubs and rims interchange with the IH Cub parts. I found a pair of Power King wheels and hubs with some good looking Goodyear Traction Torques on eBay. Since these will bolt on my Cubs, and the traction torque is my favorite tire, I bought them. The traction torque tires have been out of production for a long time and good ones with little wear are getting hard to find. I have been looking for a new or near new 11.2 X 36 traction torque to match a tire on my Farmall 200 for over 10 years.
-
John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Power King wheels will fit Cubs?
Try a set of the power King 16 inch wheels on your cub for the next pull.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
Xperimental
- 10+ Years
- Posts: 159
- Joined: Sun Apr 07, 2013 10:41 pm
- Zip Code: 47359
- Tractors Owned: Farmall 200
1956 Farmall Cub
1961 Farmall Cub
Farmall 460D
International 656D Hi-Clear
Farmall 806D
Allis Chalmers 5020 - Location: Blackford County, Indiana
Re: Power King wheels will fit Cubs?
John, I saw that some Power Kings used 16" wheels but it looked like they have a different hub bolt pattern. But a smaller diameter wheel would sure slow down ground speed and improve the pulling capacity. I often wish the Cub had a gear lower than 1rst gear.
-
John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Power King wheels will fit Cubs?
It would use more gas though since it would always be running up hill. 
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
danovercash
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Power King wheels will fit Cubs?
Don't know about the centers,but the rear wheels were made by both Goodyear and Firestone. I have one of each on the cub.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
Alan Riley
- 10+ Years
- Posts: 449
- Joined: Wed Feb 05, 2003 11:49 pm
- Zip Code: 71328
- Location: LA, Deville
Re: Power King wheels will fit Cubs?
The Power King 16" wheels use a 6-bolt pattern whereas the 24" wheels use a 5-bolt pattern.
On a Power King, the rear hubs can be changed to allow the use of either size rear wheel but the front spindles have to be changed also to keep the tractor level.
On a Power King, the rear hubs can be changed to allow the use of either size rear wheel but the front spindles have to be changed also to keep the tractor level.
Old Age: The phase of life when nothing works and everything hurts...
-
Matt Kirsch
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: Power King wheels will fit Cubs?
You could always put a LoBoy front end under it.
Who is online
Users browsing this forum: Bill Hudson and 25 guests
